Top 10 Best Rockville Signal Amplifiers
for July 2022

Recommendations are independently chosen by MOOZ’s editors. Purchases you make through our links may earn us a commission.

1
9.8
SCORE
Rockville RPA16 10000 Watt Peak / 3000w RMS 2 Channel Power Amplifier Pro/DJ Amp

Rockville RPA16 10000 Watt Peak

3000w RMS 2 Channel Power Amplifier Pro, DJ Amp

by Rockville
What We like

Features of RPA16: Rockville RPA16 10, 000 Watt Peak 2 Channel Professional/DJ Rack Mount Amplifier, LCD displays volume in dB per channel and operating temperature, 2U rack space, Built in limiter protects your speakers from distortion and clipping, Bridged mode allows you to combine both channels power into one channel for use with a subwoofer, Stereo mode is perfect for (2) speakers or (4) speakers in a left and right configuration.

more infoarrow_drop_down

Product Features

  • Built-in variable high velocity quiet cooling fans, Maximum headroom for 4-ohm and 8-ohm Speakers, Level controls for precise setting and matching of sensitivity, Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load, User serviceable fuse (25A, 250V), Frequency Response (bandwidth @ 2Vrms out, @ -3. 0dB) 10 Hz 30 Khz, THD + Noise @ 1Khz full power:
  • Power Ratings of RPA16: RMS Power Output: Stereo 8 Ohm: 2 x 1000W, Stereo 4 Ohm: 2 x 1500W, Bridged 8 Ohm: 1 x 3000W. Peak Power Output: Stereo 4 Ohm: 2 x 5000W Max, Bridged 8 Ohm: 1 x 10000W Max.
  • Input sensitivity: 0. 7v, Damping factor: ( 100Hz, 10w, 4 ohms): 36. 5, Damping factor: (1Khz @ 8 ohm): >400: 1, Effective damping factor (100Hz, 10w, 4 Ohms) 1. 08, Output impedance at speaker terminals: 0. 10975 Ohms, Frequency Response vs THD+N (worst case, across normal bandwidth 1W) 0. 6%, Signal to Noise Ratio: > 100dB, IMD 60Hz & 1kHz, 4: 1:
  • Parallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration, Built in crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or Subwoofer(s), Channel A & B Clipping Led Indicators, Channel A & B Separate Level Controls, Power, signal, clipping, and protection LED indicators on front of amp, Heavy duty rack mount ears with handles.

Input sensitivity: 0. 7v, damping factor: ( 100hz, 10w, 4 ohms): 36. 5, damping factor: (1khz @ 8 ohm): >400: 1, effective damping factor (100hz, 10w, 4 ohms) 1. 08, output impedance at speaker terminals: 0. 10975 ohms, frequency response vs thd+n (worst case, across normal bandwidth 1w) 0. 6%, signal to noise ratio: > 100db, imd 60hz & 1khz, 4: 1: Built-in variable high velocity quiet cooling fans, maximum headroom for 4-ohm and 8-ohm speakers, level controls for precise setting and matching of sensitivity, computer controlled ic protection circuitry against speaker short circuit, thermal over load, dc over load, user serviceable fuse (25a, 250v), frequency response (bandwidth @ 2vrms out, @ -3. 0db) 10 hz 30 khz, thd + noise @ 1khz full power: Parallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration, built in crossover switch (bypass, 80 hz, 160 hz) allows amp to be used with full range pa speakers, or subwoofer(s), channel a & b clipping led indicators, channel a & b separate level controls, power, signal, clipping, and protection led indicators on front of amp, heavy duty rack mount ears with handles. Power ratings of rpa16: rms power output: stereo 8 ohm: 2 x 1000w, stereo 4 ohm: 2 x 1500w, bridged 8 ohm: 1 x 3000w. peak power output: stereo 4 ohm: 2 x 5000w max, bridged 8 ohm: 1 x 10000w max.

2
9.5
SCORE
Rockville RPA70WBT 1000w 2-Ch Bluetooth Karaoke Amplifier/Mixer+Wireless Mics

Rockville RPA70WBT 1000w 2-Ch Bluetooth Karaoke Amplifier/Mixer+Wireless Mics

by Rockville
What We like

Turbo cooling twin fan system. 1/4" headphone jack. Individual pre-amp output controls w/ control knobs. Product Dimensions (W x D x H): 19" x 11.75" x 3.5" inches. Inputs On Front of Unit. iPod/MP3 - 1/8 mini jack style. 1/4 headphone jack. 1/4" Mic 1 and Mic 2 Inputs. USB Input. Rear Outputs: Preamp output for an external additional amplifier or powered speaker. Sub preamp output to connect a powered subwoofer or an amplifier

more infoarrow_drop_down

Product Features

  • Input Sensitivity: 400mv/33 KOhm. Frequency Response: 20 Hz - 20 kHz. Signal to Noise Ratio: 80 dB. Tone Characteristic: 100 Hz - 10 kHz 12dB. 110v/220v switchable. 19" Rack Mountable (Removable Rack Brackets) Digital Hybrid Amplifier/Receiver. Inputs On Front of Unit iPod/MP3 - 1/8 mini jack style 1/4 headphone jack 1/4" Mic 1 and Mic 2 Inputs USB Input. iPod/MP3 - 1/8 mini jack style. 1/4 headphone jack. 1/4" Mic 1 and Mic 2 Inputs. USB Input. Rear Inputs: RCA Input for DVD or CD
  • Digital Quartz Synthesized AM / FM tuner w/50 presets & auto scan. Preset EQ: Rock, Pop, Classical, Jazz. Remote control for quick access to all functions. Vacuum Fluorescent Digital output display meters. Separate gain controls for pre-amp & subwoofer. Digital karaoke system. 2 front microphone inputs w/volume, tone and echo controls. Built-in mic mixer with echo control. USB input for music files from USB thumb drive. 3.5mm input for iPod / MP3 player. Spectrum analyzer equalizer display
  • Rear Outputs: Preamp output for an external additional amplifier or powered speaker Sub preamp output to connect a powered subwoofer or an amplifier. Preamp output for an external additional amplifier or powered speaker. Sub preamp output to connect a powered subwoofer or an amplifier. Record output to connect a recording device. Rear Speaker Terminals: Banana plug / binding post outputs for speakers. Bluetooth Capable. Built-in Preamplifier. Multicolor LED display

Digital quartz synthesized am / fm tuner w/50 presets & auto scan. preset eq: rock, pop, classical, jazz. remote control for quick access to all functions. vacuum fluorescent digital output display meters. separate gain controls for pre-amp & subwoofer. digital karaoke system. 2 front microphone inputs w/volume, tone and echo controls. built-in mic mixer with echo control. usb input for music files from usb thumb drive. 3.5mm input for ipod / mp3 player. spectrum analyzer equalizer display Rear outputs: preamp output for an external additional amplifier or powered speaker sub preamp output to connect a powered subwoofer or an amplifier. preamp output for an external additional amplifier or powered speaker. sub preamp output to connect a powered subwoofer or an amplifier. record output to connect a recording device. rear speaker terminals: banana plug / binding post outputs for speakers. bluetooth capable. built-in preamplifier. multicolor led display Input sensitivity: 400mv/33 kohm. frequency response: 20 hz - 20 khz. signal to noise ratio: 80 db. tone characteristic: 100 hz - 10 khz 12db. 110v/220v switchable. 19" rack mountable (removable rack brackets) digital hybrid amplifier/receiver. inputs on front of unit ipod/mp3 - 1/8 mini jack style 1/4 headphone jack 1/4" mic 1 and mic 2 inputs usb input. ipod/mp3 - 1/8 mini jack style. 1/4 headphone jack. 1/4" mic 1 and mic 2 inputs. usb input. rear inputs: rca input for dvd or cd

3
9.5
SCORE
Rockville Rock 4 Zone 70 Volt Commercial Amplifier+Matrix Source Routing

Rockville Rock 4 Zone 70 Volt Commercial Amplifier+Matrix Source Routing

by ROCKVILLE
What We like

BASS and Tremble controls. Built in limiter and clipping indicator. MIC 1 priority button will lower the music when talking into the mic when priority is activated. 6 segments signal level indication (-10dB, -6dB, -3dB, 0dB, limit, clip). Built in fan cooling system keeps component cool at all times. Built in fire input will override the system when activated in case of emergencies. Siren output allows you to connect a siren that would get activated in case of an emergency.

more infoarrow_drop_down

Product Features

  • Features: Rockville ROCK MATRIX 4 Zone 70 Volt Commercial Amplifier. 440 Watts Total RMS @ less than 1 % THD (110 Watts RMS per zone x 4 Zones). Route Any Sources to Any Zones. 4 separate zone output and you can route any source to any zone and also route a microphone input to specific zone(s).
  • 8 ohm RMS power: 4 x 110 Watts RMS. 16 ohm RMS power: 4 x 110 Watts RMS. Built in Bluetooth 5.0 chip allows audio streaming with matrix assigning to any zone(s). USB input to play audio stored on a thumb drive with matrix assigning to any zone(s) (32gb max). SD card slot to play music stored on an SD Card with matrix assigning to any zone(s) (32gb max). Separate volume control for MIC1/LINE1, MIC2/LINE2, MIC3/Line3,MIC4/LINE4/MP3 inputs.
  • Supports multi zone installations using 70 volt, 100 volt, 16 ohm, 8 ohm, and 4 ohm speaker set ups. 4 line/mic inputs (2 of the mic inputs have selectable phantom power for condenser mics). 19" rack mountable (removable rack brackets). Built in 1w monitor speaker allows you to listen to playback on any zone. 100 volt RMS Power: 4 x 110 Watts RMS. 70 volt RMS Power: 4 x 110 Watts RMS. 4 ohm RMS power: 4 x 110 Watts RMS.

Features: ROCKVILLE rock matrix 4 zone 70 volt commercial amplifier. 440 watts total rms @ less than 1 % thd (110 watts rms per zone x 4 zones). route any sources to any zones. 4 separate zone output and you can route any source to any zone and also route a microphone input to specific zone(s). Supports multi zone installations using 70 volt, 100 volt, 16 ohm, 8 ohm, and 4 ohm speaker set ups. 4 line/mic inputs (2 of the mic inputs have selectable phantom power for condenser mics). 19" rack mountable (removable rack brackets). built in 1w monitor speaker allows you to listen to playback on any zone. 100 volt rms power: 4 x 110 watts rms. 70 volt rms power: 4 x 110 watts rms. 4 ohm rms power: 4 x 110 watts rms. 8 ohm rms power: 4 x 110 watts rms. 16 ohm rms power: 4 x 110 watts rms. built in bluetooth 5.0 chip allows audio streaming with matrix assigning to any zone(s). usb input to play audio stored on a thumb drive with matrix assigning to any zone(s) (32gb max). sd card slot to play music stored on an sd card with matrix assigning to any zone(s) (32gb max). separate volume control for mic1/line1, mic2/line2, mic3/line3,mic4/line4/mp3 inputs.

4
9
SCORE
Rockville 1000w 2-Ch USB Bluetooth DJ/Pro/Karaoke Amplifier Mixer, 19 inch (RPA60BT)

Rockville 1000w 2-Ch USB Bluetooth DJ/Pro/Karaoke Amplifier Mixer

19 inch (RPA60BT)

by Rockville
What We like

Built-In Mic Mixer with Echo Control. USB input for music files from USB thumb drive . 3.5mm input for iPod / MP3 player. Spectrum analyzer equalizer display. Turbo cooling twin fan system. Dimensions (W x D x H): 19" x 11.75" x 3.5" inches.

more infoarrow_drop_down

Product Features

  • Tone Characteristic: 100Hz-10KHz 12dB. 110v/220v Switchable. Inputs: iPod/MP3 - 1/8 Mini Jack Style, 1/4 Headphone Jack, 1/4" Mic 1 and Mic 2 Inputs, USB Input. Rear Inputs:RCA Input for DVD or CD. Rear Outputs: Preamp output for an external additional amplifier or powered speaker. Sub preamp output to connect a powered subwoofer or an amplifier
  • Record output to connect a recording device. Bluetooth Capable . Rear Speaker Terminals: Banana plug / binding post outputs for 4 speakers (2 on Channel A and 2 on Channel B). Built-in Pre-Amplifier. Multicolor LED Display. Digital Quartz Synthesized AM / FM Tuner with 50 Presets & Auto-Scan.
  • Rockville RPA60BT 19" 1000 Watt 2-Channel USB and Bluetooth Karaoke Receiver/Amplifier/Mixer. 19" rack mountable (removable rack brackets) digital hybrid amplifier/receiver. RMS Power @ 4 Ohms: 125w x 2 . Peak Power @ 4 Ohms: 500w x 2. RMS Power @ 8 Ohms: 100w x 2 . Peak Power @ 8 Ohms: 400w x 2. THD: > 0.1%. Input Sensitivity: 400mv/33 KOhm. Frequency Response: 20 Hz - 20 kHz. Signal to Noise Ratio: 80 dB.
  • Preset EQ: Rock, Pop, Classical, Jazz. Remote control for quick access to all functions. Vacuum Fluorescent Digital Output Display Meters. Separate gain controls for pre-amp & subwoofer. Digital Karaoke System. 2 front microphone inputs with volume, tone and echo controls.

Tone characteristic: 100hz-10khz 12db. 110v/220v switchable. inputs: ipod/mp3 - 1/8 mini jack style, 1/4 headphone jack, 1/4" mic 1 and mic 2 inputs, usb input. rear inputs:rca input for dvd or cd. rear outputs: preamp output for an external additional amplifier or powered speaker. sub preamp output to connect a powered subwoofer or an amplifier Rockville rpa60bt 19" 1000 watt 2-channel usb and bluetooth karaoke receiver/amplifier/mixer. 19" rack mountable (removable rack brackets) digital hybrid amplifier/receiver. rms power @ 4 ohms: 125w x 2 . peak power @ 4 ohms: 500w x 2. rms power @ 8 ohms: 100w x 2 . peak power @ 8 ohms: 400w x 2. thd: > 0.1%. input sensitivity: 400mv/33 kohm. frequency response: 20 hz - 20 khz. signal to noise ratio: 80 db. Record output to connect a recording device. bluetooth capable . rear speaker terminals: banana plug / binding post outputs for 4 speakers (2 on channel a and 2 on channel b). built-in pre-amplifier. multicolor led display. digital quartz synthesized am / fm tuner with 50 presets & auto-scan. Preset eq: rock, pop, classical, jazz. remote control for quick access to all functions. vacuum fluorescent digital output display meters. separate gain controls for pre-amp & subwoofer. digital karaoke system. 2 front microphone inputs with volume, tone and echo controls.

5
8.7
SCORE
Rockville RPM870 8 Channel 6000w Amplifier Mixer w/USB, Effects, 8 XDR2 Mic Pres

Rockville RPM870 8 Channel 6000w Amplifier Mixer w/USB

Effects, 8 XDR2 Mic Pres

by Rockville
What We like

Main output fader allows you to fade the sound between the left and right channel. RCA input, RCA output, and USB player. Headphone jack for monitoring the master signal and individually monitoring each channel with PFL, L/R. Gain control adjusts he sensitivity from -60dB to -20dB when the pad button is in the out position.. When the pad button is pressed in the gain will adjust from 240dB to 0dB

more infoarrow_drop_down

Product Features

  • Aux send and Aux returns on every channel to connect all types of external effects and processors. You can control your monitor mix and check levels through your headphones. Limit L and Limit R LED indicators. These limiters are designed to go brighter as clipping gets stronger and will remain lit up until the channels stop clipping. We recommend lowering the gain if you see these LEDs lit up. Power and Output level LED indicators
  • XDR2 mic preamps are low-noise and low distortion. These are some of the best sounding mic pres on the market. 1 dedicated USB input to play back music or record the main mix. USB supported formats are MP3, WAV, WMA. Built in bluetooth wireless audio streaming. 24 BIT digital effects processor with 16 preset digital effects including (reverb, chorus,, delay, chorus, phaser, flanger and various multi-effects). Effects level control can adjust signal level of each effect. Effects mute button
  • Features: Rockville RPM870 8 Channel 6000w Powered Mixer, 7 Band EQ, 24-Bit Effects, USB, 48V Phantom Power. RMS Power Output: .....750w x 2 @ 4 Ohm .....500w x 2 @ 8 Ohm. Program Power Output: .....1500w x 2 @ 4 Ohm .....1000w x 2 @ 8 Ohm. Peak Power Output: .....3000w x 2 @ 4 Ohm .....2000w x 2 @ 8 Ohm. 8 Channel mixer section: 6 mono channels, 1 stereo channel. 8 high-quality XDR2 mic preamps with switchable +48 V phantom power for condenser microphones
  • FX footswitch input lets you turn your effects on or off. 4-Band EQ (high, high-mid, low-mid, low) per channel. Each channel is equipped with pad, must, and solo buttons with LEDs. Each channel has gain, aux control, FX control, Pan control, Volume control. Peak LED indicator has a red LED that indicates a signal level that is 5dB below clipping. Dual Stereo 7-band Graphic EQ allows for precise frequency correction of monitor and main outputs (with EQ kill switch)

Fx footswitch input lets you turn your effects on or off. 4-band eq (high, high-mid, low-mid, low) per channel. each channel is equipped with pad, must, and solo buttons with leds. each channel has gain, aux control, fx control, pan control, volume control. peak led indicator has a red led that indicates a signal level that is 5db below clipping. dual stereo 7-band graphic eq allows for precise frequency correction of monitor and main outputs (with eq kill switch) Aux send and aux returns on every channel to connect all types of external effects and processors. you can control your monitor mix and check levels through your headphones. limit l and limit r led indicators. these limiters are designed to go brighter as clipping gets stronger and will remain lit up until the channels stop clipping. we recommend lowering the gain if you see these leds lit up. power and output level led indicators Xdr2 mic preamps are low-noise and low distortion. these are some of the best sounding mic pres on the market. 1 dedicated usb input to play back music or record the main mix. usb supported formats are mp3, wav, wma. built in bluetooth wireless audio streaming. 24 bit digital effects processor with 16 preset digital effects including (reverb, chorus,, delay, chorus, phaser, flanger and various multi-effects). effects level control can adjust signal level of each effect. effects mute button Features: Rockville rpm870 8 channel 6000w powered mixer, 7 band eq, 24-bit effects, usb, 48v phantom power. rms power output: .....750w x 2 @ 4 ohm .....500w x 2 @ 8 ohm. program power output: .....1500w x 2 @ 4 ohm .....1000w x 2 @ 8 ohm. peak power output: .....3000w x 2 @ 4 ohm .....2000w x 2 @ 8 ohm. 8 channel mixer section: 6 mono channels, 1 stereo channel. 8 high-quality xdr2 mic preamps with switchable +48 v phantom power for condenser microphones

6
8.5
SCORE
Rockville RPA60BT 1000w 2 Channel Rack DJ Amplifier/Mixer/Amp w/ Bluetooth/USB

Rockville RPA60BT 1000w 2 Channel Rack DJ Amplifier/Mixer/Amp w/ Bluetooth/USB

What We like

Features: Rockville RPA60BT 1000w 2 Channel Rack DJ Amplifier/Mixer/Amp w/ Bluetooth/USB, 19" rack mountable (removable rack brackets) digital hybrid amplifier/receiver, RMS Power @ 4 Ohms: 125w x 2, Peak Power @ 4 Ohms: 500w x 2, RMS Power @ 8 Ohms: 100w x 2, Peak Power @ 8 Ohms: 400w x 2, THD: > 0.1%, Input Sensitivity: 400mv/33 KOhm

more infoarrow_drop_down

Product Features

  • Digital Karaoke System, 2 front microphone inputs with volume, tone and echo controls, Built-In Mic Mixer with Echo Control, USB input for music files from USB thumb drive, 3.5mm input for iPod / MP3 player, Spectrum analyzer equalizer display, Turbo cooling twin fan system, Dimensions (W x D x H): 19" x 11.75" x 3.5" inches
  • Frequency Response: 20 Hz - 20 kHz, Signal to Noise Ratio: 80 dB, Tone Characteristic: 100Hz-10KHz 12dB, 110v/220v Switchable, Inputs: iPod/MP3 - 1/8 Mini Jack Style, 1/4 Headphone Jack, 1/4" Mic 1 and Mic 2 Inputs, USB Input, Rear Inputs: RCA Input for DVD or CD, Rear Outputs: Preamp output for an external additional amplifier or powered speaker, Sub preamp output to connect a powered subwoofer or an amplifier, Record output to connect a recording device, Bluetooth Capable
  • Rear Speaker Terminals: Banana plug / binding post outputs for 4 speakers (2 on Channel A and 2 on Channel B), Built-in Pre-Amplifier, Multicolor LED Display, Digital Quartz Synthesized AM / FM Tuner with 50 Presets & Auto-Scan, Preset EQ: Rock, Pop, Classical, Jazz, Remote control for quick access to all functions, Vacuum Fluorescent Digital Output Display Meters, Separate gain controls for pre-amp & subwoofer

Rear speaker terminals: banana plug / binding post outputs for 4 speakers (2 on channel a and 2 on channel b), built-in pre-amplifier, multicolor led display, digital quartz synthesized am / fm tuner with 50 presets & auto-scan, preset eq: rock, pop, classical, jazz, remote control for quick access to all functions, vacuum fluorescent digital output display meters, separate gain controls for pre-amp & subwoofer Digital karaoke system, 2 front microphone inputs with volume, tone and echo controls, built-in mic mixer with echo control, usb input for music files from usb thumb drive, 3.5mm input for ipod / mp3 player, spectrum analyzer equalizer display, turbo cooling twin fan system, dimensions (w x d x h): 19" x 11.75" x 3.5" inches Frequency response: 20 hz - 20 khz, signal to noise ratio: 80 db, tone characteristic: 100hz-10khz 12db, 110v/220v switchable, inputs: ipod/mp3 - 1/8 mini jack style, 1/4 headphone jack, 1/4" mic 1 and mic 2 inputs, usb input, rear inputs: rca input for dvd or cd, rear outputs: preamp output for an external additional amplifier or powered speaker, sub preamp output to connect a powered subwoofer or an amplifier, record output to connect a recording device, bluetooth capable

7
7.8
SCORE
Rockville RPM1870 18 Channel 6000w Amplifier Mixer USB, Effects/ 16 XDR2 Mic Pres

Rockville RPM1870 18 Channel 6000w Amplifier Mixer USB

Effects/ 16 XDR2 Mic Pres

by Rockville
What We like

Limit L and Limit R LED indicators. These limiters are designed to go brighter as clipping gets stronger and will remain lit up until the channels stop clipping. We recommend lowering the gain if you see these LEDs lit up. Power and Output level LED indicators. Main output fader allows you to fade the sound between the left and right channel. RCA input, RCA output, and USB player. Headphone jack for monitoring the master signal and individually monitoring each channel with PFL, L/R

more infoarrow_drop_down

Product Features

  • Features: Rockville RPM1870 6000 watt Powered Mixer, 7 Band EQ, 24-Bit Effects, USB, Bluetooth, and 48V Phantom Power. RMS Power Output: 750 Watts x 2 @ 4 Ohm. 500 Watts x 2 @ 8 Ohm. Program Power Output: 1500 Watts x 2 @ 4 Ohm. 1000 Watts x 2 @ 8 Ohm. Peak Power Output: 3000 Watts x 2 @ 4 Ohm. 2000 Watts x 2 @ 8 Ohm. 18 Channel mixer section: 16 mono channels, 1 stereo channel. 18 high-quality XDR2 mic preamps with switchable +48 V phantom power for condenser microphones
  • XDR2 mic preamps are low-noise and low distortion. These are some of the best sounding mic pres on the market. Built in USB allows you to play songs from your computer or a thumb drives. Built in recording - allows you to record your main mix on to a USB drive. USB supported formats are MP3, WAV, WMA. Built in advanced bluetooth wireless audio streaming with the most reliable Bluetooth chip on the market
  • Peak LED indicator has a red LED that indicates a signal level that is 5dB below clipping. Dual Stereo 7-band Graphic EQ allows for precise frequency correction of monitor and main outputs (with EQ kill switch). Aux send and Aux returns on every channel to connect all types of external effects and processors. You can control your monitor mix and check levels through your headphones
  • 24 BIT digital effects processor with 16 preset digital effects including (reverb, chorus,, delay, chorus, phaser, flanger and various multi-effects). Effects level control can adjust signal level of each effect. Effects mute button. FX footswitch input lets you turn your effects on or off. 4-Band EQ (high, high-mid, low-mid, low) per channel. Each channel is equipped with pad, mute, and solo buttons with LEDs. Each channel has gain, aux control, FX control, Pan control, Volume control

Xdr2 mic preamps are low-noise and low distortion. these are some of the best sounding mic pres on the market. built in usb allows you to play songs from your computer or a thumb drives. built in recording - allows you to record your main mix on to a usb drive. usb supported formats are mp3, wav, wma. built in advanced bluetooth wireless audio streaming with the most reliable bluetooth chip on the market Peak led indicator has a red led that indicates a signal level that is 5db below clipping. dual stereo 7-band graphic eq allows for precise frequency correction of monitor and main outputs (with eq kill switch). aux send and aux returns on every channel to connect all types of external effects and processors. you can control your monitor mix and check levels through your headphones 24 bit digital effects processor with 16 preset digital effects including (reverb, chorus,, delay, chorus, phaser, flanger and various multi-effects). effects level control can adjust signal level of each effect. effects mute button. fx footswitch input lets you turn your effects on or off. 4-band eq (high, high-mid, low-mid, low) per channel. each channel is equipped with pad, mute, and solo buttons with leds. each channel has gain, aux control, fx control, pan control, volume control Features: Rockville rpm1870 6000 watt powered mixer, 7 band eq, 24-bit effects, usb, bluetooth, and 48v phantom power. rms power output: 750 watts x 2 @ 4 ohm. 500 watts x 2 @ 8 ohm. program power output: 1500 watts x 2 @ 4 ohm. 1000 watts x 2 @ 8 ohm. peak power output: 3000 watts x 2 @ 4 ohm. 2000 watts x 2 @ 8 ohm. 18 channel mixer section: 16 mono channels, 1 stereo channel. 18 high-quality xdr2 mic preamps with switchable +48 v phantom power for condenser microphones

8
7.5
SCORE
Rockville RPA70WBT 1000w 2 Channel Rack DJ Amplifier/Mixer/w/ Bluetooth/USB+Mics

Rockville RPA70WBT 1000w 2 Channel Rack DJ Amplifier/Mixer/w/ Bluetooth/USB+Mics

What We like

Features of RPA70WBT: RMS Power @ 4 Ohms: 125 Watts x 2, Peak Power @ 4 Ohms: 500 Watts x 2, RMS Power @ 8 Ohms: 100 Watts x 2, Peak Power @ 8 Ohms: 400 Watts x 2, THD: > 0.1%, Input Sensitivity: 400mv/33 KOhm, Frequency Response: 20 Hz - 20 kHz, Signal to Noise Ratio: 80 dB, Tone Characteristic: 100 Hz - 10 kHz 12dB

more infoarrow_drop_down

Product Features

  • Preset EQ: Rock, Pop, Classical, Jazz, Remote control for quick access to all functions, Vacuum Fluorescent Digital output display meters, Separate gain controls for pre-amp & subwoofer, Digital karaoke system, 2 front microphone inputs w/volume, tone and echo controls, Built-in mic mixer with echo control
  • 110v/220v switchable, 19" Rack Mountable (Removable Rack Brackets) Digital Hybrid Amplifier/Receiver, Inputs On Front of Unit, iPod/MP3 - 1/8 mini jack style, 1/4 headphone jack, 1/4" Mic 1 and Mic 2 Inputs, USB Input, Rear Inputs: RCA Input for DVD or CD, Rear Outputs:, Preamp output for an external additional amplifier or powered speaker
  • Sub preamp output to connect a powered subwoofer or an amplifier, Record output to connect a recording device, Rear Speaker Terminals: Banana plug / binding post outputs for speakers, Bluetooth Capable, Built-in Preamplifier, Multicolor LED display, Digital Quartz Synthesized AM / FM tuner w/50 presets & auto scan
  • USB input for music files from USB thumb drive, 3.5mm input for iPod / MP3 player, Spectrum analyzer equalizer display, Turbo cooling twin fan system, 1/4" headphone jack, Individual pre-amp output controls w/ control knobs, Product Dimensions (W x D x H): 19" x 11.75" x 3.5" inches

110v/220v switchable, 19" rack mountable (removable rack brackets) digital hybrid amplifier/receiver, inputs on front of unit, ipod/mp3 - 1/8 mini jack style, 1/4 headphone jack, 1/4" mic 1 and mic 2 inputs, usb input, rear inputs: rca input for dvd or cd, rear outputs:, preamp output for an external additional amplifier or powered speaker Sub preamp output to connect a powered subwoofer or an amplifier, record output to connect a recording device, rear speaker terminals: banana plug / binding post outputs for speakers, bluetooth capable, built-in preamplifier, multicolor led display, digital quartz synthesized am / fm tuner w/50 presets & auto scan Usb input for music files from usb thumb drive, 3.5mm input for ipod / mp3 player, spectrum analyzer equalizer display, turbo cooling twin fan system, 1/4" headphone jack, individual pre-amp output controls w/ control knobs, product dimensions (w x d x h): 19" x 11.75" x 3.5" inches Preset eq: rock, pop, classical, jazz, remote control for quick access to all functions, vacuum fluorescent digital output display meters, separate gain controls for pre-amp & subwoofer, digital karaoke system, 2 front microphone inputs w/volume, tone and echo controls, built-in mic mixer with echo control

9
7.5
SCORE
Rockville RPA16 10,000 Watt 2 Channel Power Amplifier Pro/DJ Amp+Speakon Cables

Rockville RPA16 10

000 Watt 2 Channel Power Amplifier Pro/DJ Amp+Speakon Cables

by Rockville
What We like

Speak on output. XLR output to connect another amplifier or powered sub. ?Features of RPA16: Rockville RPA16 10,000 Watt Peak 2 Channel Professional/DJ Rack Mount Amplifier. LCD displays volume in dB per channel and operating temperature. 2U rack space. Built in limiter protects your speakers from distortion and clipping. Bridged mode allows you to combine both channels power into one channel for use with a subwoofer

more infoarrow_drop_down

Product Features

  • Stereo mode is perfect for (2) speakers or (4) speakers in a left and right configuration. Parallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration. Built in crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or Subwoofer(s). Channel A & B Clipping Led Indicators. Channel A & B Separate Level Controls
  • Power, signal, clipping, and protection LED indicators on front of amp. Heavy duty rack mount ears with handles. Built-in variable high velocity quiet cooling fans. Maximum headroom for 4-ohm and 8-ohm Speakers. Level controls for precise setting and matching of sensitivity. Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load. User serviceable fuse (25A, 250V). Frequency Response (bandwidth @ 2Vrms out, @ -3.0dB) 10 Hz 30 Khz
  • Package Includes: (1) Rockville RPA16 10000 Watt Peak / 3000w RMS 2 Channel Power Amplifier Pro/DJ Amp. (2) Rockvile RCSS1425 25' 14 AWG Speakon to Speakon Speaker Cable 100% Copper. Power Ratings: RMS Power Output: Stereo 8 Ohm: 2 x 1,000W. Stereo 4 Ohm: 2 x 1,500W. Bridged 8 Ohm: 1 x 3000W. Peak Power Output: Stereo 4 Ohm: 2 x 5,000W Max. Bridged 8 Ohm: 1 x 10,000W Max. Terminals: Input Terminals: Combo jack (XLR and ) A & B inputs. Output Terminals: Banana binding post speaker output
  • THD + Noise @ 1Khz full power: 400:1. Effective damping factor (100Hz, 10w, 4 Ohms) 1.08. Output impedance at speaker terminals: 0.10975 Ohms. Frequency Response vs THD+N (worst case, across normal bandwidth 1W) 0.6%. Signal to Noise Ratio: > 100dB. IMD 60Hz & 1kHz, 4:1:

Thd + noise @ 1khz full power: 400:1. effective damping factor (100hz, 10w, 4 ohms) 1.08. output impedance at speaker terminals: 0.10975 ohms. frequency response vs thd+n (worst case, across normal bandwidth 1w) 0.6%. signal to noise ratio: > 100db. imd 60hz & 1khz, 4:1: Power, signal, clipping, and protection led indicators on front of amp. heavy duty rack mount ears with handles. built-in variable high velocity quiet cooling fans. maximum headroom for 4-ohm and 8-ohm speakers. level controls for precise setting and matching of sensitivity. computer controlled ic protection circuitry against speaker short circuit, thermal over load, dc over load. user serviceable fuse (25a, 250v). frequency response (bandwidth @ 2vrms out, @ -3.0db) 10 hz 30 khz Package includes: (1) Rockville rpa16 10000 watt peak / 3000w rms 2 channel power amplifier pro/dj amp. (2) rockvile rcss1425 25' 14 awg speakon to speakon speaker cable 100% copper. power ratings: rms power output: stereo 8 ohm: 2 x 1,000w. stereo 4 ohm: 2 x 1,500w. bridged 8 ohm: 1 x 3000w. peak power output: stereo 4 ohm: 2 x 5,000w max. bridged 8 ohm: 1 x 10,000w max. terminals: input terminals: combo jack (xlr and ) a & b inputs. output terminals: banana binding post speaker output Stereo mode is perfect for (2) speakers or (4) speakers in a left and right configuration. parallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration. built in crossover switch (bypass, 80 hz, 160 hz) allows amp to be used with full range pa speakers, or subwoofer(s). channel a & b clipping led indicators. channel a & b separate level controls

10
7.5
SCORE
Rockville RPA5 400w RMS (200 x 2) 2 Channel Power Amplifier Pro/DJ Amp

Rockville RPA5 400w RMS (200 x 2) 2 Channel Power Amplifier Pro/DJ Amp

by Rockville
What We like

Built in crossover switch allows make this perfect for speakers, monitors, or subwoofers. Channel A & B Clipping Led Indicators.

more infoarrow_drop_down

Product Features

  • Rockville RPA5 400w RMS (200 x 2) 2 Channel Professional/DJ Rack Mount Amplifier. 2U rack space.
  • Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load.
  • User serviceable fuse (4A, 250V). Frequency Response: 20Hz to 20KHz
  • Channel A & B Separate Level Controls. Power, signal, overload, clipping, and protection LED indicators on front of amp.
  • Maximum headroom for 4-ohm and 8-ohm Speakers. Level controls for precise setting and matching of sensitivity.

Input impedance: 20k ohm balanced and 10k ohm unbalanced. signal to noise ratio: > 102db. Heavy duty rack mount ears with handles. built-in dual high velocity quiet cooling fans. Rockville rpa5 400w rms (200 x 2) 2 channel professional/dj rack mount amplifier. 2u rack space. Power requirements: 120v / 50-60hz. weight: 13.4 lbs. dimensions: 18.97" x 11.02" x 3.54". User serviceable fuse (4a, 250v). frequency response: 20hz to 20khz Bridged and stereo output switch makes this perfect for (2) subwoofer, (2) speakers, or (4) speakers. Channel a & b separate level controls. power, signal, overload, clipping, and protection led indicators on front of amp. Maximum headroom for 4-ohm and 8-ohm speakers. level controls for precise setting and matching of sensitivity. Computer controlled ic protection circuitry against speaker short circuit, thermal over load, dc over load.

expand_less

I Agree
We use cookies to enhance and personalise your experience with us by collecting information about the pages you visit and actions taken on the site. More details