Top 10 Pellet Stove Heats
for April 2021

Recommendations are independently chosen by MOOZ’s editors. Purchases you make through our links may earn us a commission.

1
9.8
SCORE
5 Blades Wood Burning Stove Fireplace Fan - Improved PYBBO Silent Motors Heat Powered Circulates Warm/Heated Air Eco Stove Fan for Gas/Pellet/Wood/Log Stoves with Magnetic Thermometer

PYBBO 5 Blades Wood Burning Stove Fireplace Fan

Improved PYBBO Silent Motors Heat Powered Circulates Warm/Heated Air Eco Stove Fan for Gas/Pellet/Wood/Log Stoves with Magnetic Thermometer

by IPYBBO
What We like

Upgraded5-Blade will provide larger air volume,making it the most efficient way to heat your room from your stove, widely used for wood burning stove, gas stove, pellet stove and more. A magnetic thermometer included to monitor the temperature of your stove

more infoarrow_drop_down

Product Features

  • Silent operation, spread heat around room and increase temperature with low noise, improve warm air circulation results in greater comfort and reduce wood consumption from your stove. More stable and environmental protection
  • No batteries or mains electricity required, the moelectric module acts as a small generator to power the fan's motor. The fan base and blade are made from anodized aluminum which is rust-proof, wear-resisting, with good thermal conductivity
  • Overheating protection, the in-built bi-metallic strip at the base of the stove fan is designed to raise the edge of the fan slightly as the maximum operating temperature is approached to protect the motor and the moelectric module
  • Recommended surface temperature is between 158F - 644F (70C - 340C). If the fan doesn't run in time after reaching the temperature, please move the blade slightly (do not touch it directly with your hands. The maximum temperature that the product can withstand is 350-400 degrees. Exceeding this temperature may damage the motor. Please test the temperature of the fireplace before purchase and pay attention to monitoring the temperature change during use

No batteries or mains electricity required, the moelectric module acts as a small generator to power the fan's motor. the fan base and blade are made from anodized aluminum which is rust-proof, wear-resisting, with good thermal conductivity Overheating protection, the in-built bi-metallic strip at the base of the stove fan is designed to raise the edge of the fan slightly as the maximum operating temperature is approached to protect the motor and the moelectric module Recommended surface temperature is between 158f - 644f (70c - 340c). if the fan doesn't run in time after reaching the temperature, please move the blade slightly (do not touch it directly with your hands. the maximum temperature that the product can withstand is 350-400 degrees. exceeding this temperature may damage the motor. please test the temperature of the fireplace before purchase and pay attention to monitoring the temperature change during use Silent operation, spread heat around room and increase temperature with low noise, improve warm air circulation results in greater comfort and reduce wood consumption from your stove. more stable and environmental protection

2
9.8
SCORE
GALAFIRE [ 2 Years ] 122°F Start Silent Heat Powered Wood Stove Fan 4 Blade Black Small for Gas/Pellet/Wood/Log Burning Stoves + Thermometer

GALAFIRE [ 2 Years ] 122°F Start Silent Heat Powered Wood Stove Fan 4 Blade Black Small for Gas/Pellet/Wood/Log Burning Stoves + Thermometer

by Viola Tech
What We like

✅ [ Compact Design ] - Height only 19 cm / 7.48'' to fit narrow spaces, ideal for all kinds of wood burning stoves, gas stoves, pellet stoves, etc.

more infoarrow_drop_down

Product Features

  • ✅ [ Must Have Fireplace Accessories ] - Heat powered wood stove fan N429 makes you feel warm faster + Magnetic Stove Thermometer measures operating temperature to keep your stove safe.
  • ✅ [ Burn Less Fuels, No Noise ] Quietly increase your stove efficiency, evenly distribute warm air thoughout the room with less fuels burned.
  • ✅ [ No Running Cost ] - Self-start at temp as low as 50C / 122F, no batteries required non-electric fan. Note: If the max temp on your stove top is even below 100C / 212F, DO NOT BUY, the fan will can't works efficiently.

✅ [ burn less fuels, no noise ] quietly increase your stove efficiency, evenly distribute warm air thoughout the room with less fuels burned. ✅ [ must have fireplace accessories ] - heat powered wood stove fan n429 makes you feel warm faster + magnetic stove thermometer measures operating temperature to keep your stove safe. ✅ [ no running cost ] - self-start at temp as low as 50c / 122f, no batteries required non-electric fan. note: if the max temp on your stove top is even below 100c / 212f, do not buy, the fan will can't works efficiently.

3
9
SCORE
GALAFIRE [ 2 Years ] Eco Heat Powered Wood Stove Fan for Gas/Pellet/Log/Wood Buring Stoves, Fireplace Fan 4 Blade Black + Stove Thermometer

GALAFIRE [ 2 Years ] Eco Heat Powered Wood Stove Fan for Gas/Pellet/Log/Wood Buring Stoves

Fireplace Fan 4 Blade Black + Stove Thermometer

by Viola Technology
What We like

✅ [ No Noise ] Whisper quiet operation, soft heat circulation, ideal for a sweet cozy room.

more infoarrow_drop_down

Product Features

  • ✅ [ Fast Start, No Running Cost ] - Self-powered by heat, at temperature as low as 50C/122F, no electricity or batteries required. NOTE: If the max temperature on your stove top is even below 100C / 212F, DO NOT buy, the fan will can't works efficiently.
  • ✅ [ Must Have Fireplace Accessories ] - Silent 4 blade heat powered wood stove fan N430 + Magnetic Stove Thermometer, widely used for wood burning stoves, gas stoves, pellet stoves, etc.
  • ✅ [ Burn Less Fuels ] Large airflow, enhanced stove efficiency with less fuels burned, cut your fuel bills.

✅ [ burn less fuels ] large airflow, enhanced stove efficiency with less fuels burned, cut your fuel bills. ✅ [ must have fireplace accessories ] - silent 4 blade heat powered wood stove fan n430 + magnetic stove thermometer, widely used for wood burning stoves, gas stoves, pellet stoves, etc. ✅ [ fast start, no running cost ] - self-powered by heat, at temperature as low as 50c/122f, no electricity or batteries required. note: if the max temperature on your stove top is even below 100c / 212f, do not buy, the fan will can't works efficiently.

4
9
SCORE
Ansinna Wood Stove Fan,4 Blades Heat Powered Fireplace Fan,Silent Heat Powered Wood Stove Fan,No Electricity Required,for Gas/Pellet/Wood Log Burner Fireplace

Ansinna Wood Stove Fan

4 Blades Heat Powered Fireplace Fan, Silent Heat Powered Wood Stove Fan, No Electricity Required, for Gas/Pellet/Wood Log Burner Fireplace

by Ansinna
What We like

NOTE - This unique stove fan is designed to be placed on your wood stove to make efficient air circulate indoors quickly and efficiently. It does not provide strong wind power like ordinary fans.

more infoarrow_drop_down

Product Features

  • Upgraded 4-Blade - Heat powered stove fans are widely used in wood-burning stoves, gas stoves, pellet stoves, etc. The recommended surface temperature is between 122F-644F (50C-340C).
  • Reduce Consumption,More Efficiency - The wood stove fan will help reduce the fuel consumption and make the room warmer quickly.spread heat around room and increase temperature, improve warm air circulation results in greater comfort and reduce wood consumption from your stove.
  • No Power Required - Stove fan heat powered.No fire hazard.The stove fan uses heat from the stove surface to spin,adjust its speed automatically with the stove surface temperature.
  • Very Silent - The only moving part is the blade assembly.The noise of the silent heat powered wood stove fan is less than 25db, you don't even know where the fan is, but you still feel warm.

Upgraded 4-blade - heat powered stove fans are widely used in wood-burning stoves, gas stoves, pellet stoves, etc. the recommended surface temperature is between 122f-644f (50c-340c). No power required - stove fan heat powered.no fire hazard.the stove fan uses heat from the stove surface to spin,adjust its speed automatically with the stove surface temperature. Very silent - the only moving part is the blade assembly.the noise of the silent heat powered wood stove fan is less than 25db, you don't even know where the fan is, but you still feel warm. Reduce consumption,more efficiency - the wood stove fan will help reduce the fuel consumption and make the room warmer quickly.spread heat around room and increase temperature, improve warm air circulation results in greater comfort and reduce wood consumption from your stove.

5
8.9
SCORE
CRSURE Wood Stove Fan, 4-Blade Fireplace Fan Heat Powered, Thermal Fan for Wood Stove/Burner/Wood Burning Stove Top, Eco Friendly Fans Specially for Pellet Stove

CRSURE Wood Stove Fan

4-Blade Fireplace Fan Heat Powered, Thermal Fan for Wood Stove/Burner/Wood Burning Stove Top, Eco Friendly Fans Specially for Pellet Stove

by CRSURE
What We like

Maple Leaf DesignOur SF-624 heat powered fan is made of MAPLE LEAF design,which is not only very fashionable,but its 191mm high to fit all spaces and takes up very minimal space.

more infoarrow_drop_down

Product Features

  • Longer LifetimeThe stove fan support is made with Anodized Aluminum, able to resist high temperature up to 340C(644F) , no deformation and no discoloration even after long time working under high temperature.
  • 40%Increase in Airflow 2020 Upgrade Technology,faster Speed,40% more airflow than other model.Our SF-624 fan is the best performing heat powered fan for wood burning stove so far.
  • Virtually Silent in OperationNoise
  • Inbuilt Protection SystemWhen the temperature reaches 350C (662F), the protection system to stop the stove fan magnetic overheating, to avoid damage to the components by overheating.

Longer lifetimethe stove fan support is made with anodized aluminum, able to resist high temperature up to 340c(644f) , no deformation and no discoloration even after long time working under high temperature. Virtually silent in operationnoise 40%increase in airflow 2020 upgrade technology,faster speed,40% more airflow than other model.our sf-624 fan is the best performing heat powered fan for wood burning stove so far. Inbuilt protection systemwhen the temperature reaches 350c (662f), the protection system to stop the stove fan magnetic overheating, to avoid damage to the components by overheating.

6
8.8
SCORE
CRSURE Wood Stove Fan, 4-Blade Fireplace Fan Heat Powered, Thermal Fans for Wood Stoves/Burner/Wood Burning Stove Top, Eco Friendly Fans Specially for Pellet Stove (Mini Size)

CRSURE Wood Stove Fan

4-Blade Fireplace Fan Heat Powered, Thermal Fans for Wood Stoves/Burner/Wood Burning Stove Top, Eco Friendly Fans Specially for Pellet Stove (Mini Size)

by CRSURE
What We like

Circular Thickened Baffle DesignOur SF-524wood stove fan is made of -Circular Thickened Baffle Protection Motor Design ,the service life of the motor will be greatly lengthened,and the fan made of high qualified aluminum material which makes the fan more solid and durable.

more infoarrow_drop_down

Product Features

  • Eco-FriendlyOur SF-524 heat powered wood stove fan don't need electricity,no running cost, powered by heat,speed automatic controlled by temp of stove top and reduce emissions of stoves,maximizes efficiency of stove
  • Warm FasterThe wood burning stove start to work at temperature 50C(122F),quickly Circulates warm air throughout the room.
  • Safe Protection The SF-524 fire stove fan inbuilt protection system to stop them overheat ,dont worry about a security incident and enjoy a good life.
  • Easy to Install Ready to use out of box,simply place of top of your stove or wood burner whilst they are in operation and watch the magic happen,silent operation,no noise.

Safe protection the sf-524 fire stove fan inbuilt protection system to stop them overheat ,dont worry about a security incident and enjoy a good life. Eco-friendlyour sf-524 heat powered wood stove fan don't need electricity,no running cost, powered by heat,speed automatic controlled by temp of stove top and reduce emissions of stoves,maximizes efficiency of stove Easy to install ready to use out of box,simply place of top of your stove or wood burner whilst they are in operation and watch the magic happen,silent operation,no noise. Warm fasterthe wood burning stove start to work at temperature 50c(122f),quickly circulates warm air throughout the room.

7
8.4
SCORE
PelletStovePro - King Ashley 5500XLT & 5500M Pellet Stove Distribution Convection Blower Fan 80472A

PelletStovePro

King Ashley 5500XLT & 5500M Pellet Stove Distribution Convection Blower Fan 80472A

by US King Ashley
What We like

King Ashley 5500XLT & 5500M Pellet Stove Distribution Convection Blower Fan 80472A

more infoarrow_drop_down

Product Features

  • Compatible with 80472
  • Voltage: 115 VAC 60 Hz

Compatible with 80472 Voltage: 115 vac 60 hz

8
8.4
SCORE
CWLAKON Heat Powered Stove Fan-2020 Upgrade Designed Silent Operation 4 Blades with Stove Thermometer for Wood/Log Burner/Fireplace-Eco Friendly and Efficient Heat Distribution(Black)

CWLAKON Heat Powered Stove Fan-2020 Upgrade Designed Silent Operation 4 Blades with Stove Thermometer for Wood/Log Burner/Fireplace-Eco Friendly and Efficient Heat Distribution(Black)

by CWLAKON
What We like

Whisper QuietNewly Designed Blade,Larger Air Volume,Lower noise.You don't even know the stove fan is there,but you feel the warmth!You will enjoy the warm air in a quiet and comfortable environment.

more infoarrow_drop_down

Product Features

  • Longer LifetimeThere is a Bi-metallic safety device in the base of the fan.If the surface temperature rises above around 400F (200C),the safety device gently elevates the front of the fan to protect the TEG and motor.
  • Eco-Friendly and Self-PoweredThermoelectric module acts as a small generator to power the fan's motor. No batteries or electricity required! Improved warm air circulation results in greater comfort and reduce wood consumption from your stove.Stove operating with normal surface temperatures between 122F(50C) and 716F(380C).[Energy Class A+++]
  • Start Automatically2020 Upgrade Technology,Reinforced 4 Blades,Faster Speed,Larger Air Volume.The heat powered stove fan is designed to circulate the warm air created by a wood / coal or pellet burning.Efficiently circulates warm air throughout the room.
  • Safty DesignThe stove fan support is made with Anodized Aluminum, able to resist high temperature up to 662F(350C), no deformation and no discoloration even after long time working under high temperature.

Safty designthe stove fan support is made with anodized aluminum, able to resist high temperature up to 662f(350c), no deformation and no discoloration even after long time working under high temperature. Eco-friendly and self-poweredthermoelectric module acts as a small generator to power the fan's motor. no batteries or electricity required! improved warm air circulation results in greater comfort and reduce wood consumption from your stove.stove operating with normal surface temperatures between 122f(50c) and 716f(380c).[energy class a+++] Start automatically2020 upgrade technology,reinforced 4 blades,faster speed,larger air volume.the heat powered stove fan is designed to circulate the warm air created by a wood / coal or pellet burning.efficiently circulates warm air throughout the room. Longer lifetimethere is a bi-metallic safety device in the base of the fan.if the surface temperature rises above around 400f (200c),the safety device gently elevates the front of the fan to protect the teg and motor.

9
8.4
SCORE
Ashley Hearth United States Stove Company Heat Shield - 51in.W x 42in.H, 24-Gauge Metal

Ashley Hearth United States Stove Company Heat Shield

51in.W x 42in.H, 24-Gauge Metal

by Ashley Hearth
What We like

Provides heavy-duty protection against excessive heat from a wood stove

more infoarrow_drop_down

Product Features

  • Reduces clearances between stove and other combustibles
  • Serves as safety feature aiding in protection of entire home
  • 24-gauge metal
  • Heat-resistant

24-gauge metal Serves as safety feature aiding in protection of entire home Reduces clearances between stove and other combustibles Heat-resistant

10
7.8
SCORE
Large Pellet Basket, Heating Source Using Wood Pellets in Your Wood Stove or Fireplace

Large Pellet Basket

Heating Source Using Wood Pellets in Your Wood Stove or Fireplace

by burnwoodpellet
What We like

7 Day Return Policy. Customer responsible for all shipping charges.

more infoarrow_drop_down

Product Features

  • Heavy Duty All Welded
  • Basket weights 16 lbs and holds 16 lbs of wood pellets
  • Dimensions are 17" Wide X 8" Deep X 9.5" High
  • 1/4 inch thick, non - perforated

Dimensions are 17" wide x 8" deep x 9.5" high 1/4 inch thick, non - perforated Heavy duty all welded Basket weights 16 lbs and holds 16 lbs of wood pellets

expand_less

I Agree
We use cookies to enhance and personalise your experience with us by collecting information about the pages you visit and actions taken on the site. More details