Top 10 Best Onsrud Cutting Tools
for December 2021

Recommendations are independently chosen by MOOZ’s editors. Purchases you make through our links may earn us a commission.

1
9.7
SCORE
LMT Onsrud 60-127MWSolid Carbide Max Life Compression Spiral Cutting Tool, Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000

LMT Onsrud 60-127MWSolid Carbide Max Life Compression Spiral Cutting Tool

Inch, Uncoated (Bright) Finish, 30 Degree Helix, 2 Flutes, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter

by LMT Onsrud
What We like

Round shanks allow use with a wide variety of toolholding systems

more infoarrow_drop_down

Product Features

  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Double flute, 30 degree angle
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging

Double flute, 30 degree angle Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging

2
9.5
SCORE
LMT Onsrud 63-610 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000

LMT Onsrud 63-610 Solid Carbide Upcut Spiral O Flute Cutting Tool

Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.2500" Shank Diameter

by LMT Onsrud
What We like

Round shanks allow use with a wide variety of toolholding systems

more infoarrow_drop_down

Product Features

  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Single flute, 22 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications Single flute, 22 degree angle Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

3
9.5
SCORE
LMT Onsrud 65-023 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000

LMT Onsrud 65-023 Solid Carbide Upcut Spiral O Flute Cutting Tool

Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter

by LMT Onsrud
What We like

Round shanks allow use with a wide variety of toolholding systems

more infoarrow_drop_down

Product Features

  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • Single flute, 21 degree angle
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

Single flute, 21 degree angle Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

4
9.5
SCORE
LMT Onsrud 63-625 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 3.0000

LMT Onsrud 63-625 Solid Carbide Upcut Spiral O Flute Cutting Tool

Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.3750" Cutting Diameter, 0.3750" Shank Diameter

by LMT Onsrud
What We like

Round shanks allow use with a wide variety of toolholding systems

more infoarrow_drop_down

Product Features

  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Single flute, 22 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications Single flute, 22 degree angle

5
8.8
SCORE
LMT Onsrud 63-606 Solid Carbide Upocut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000

LMT Onsrud 63-606 Solid Carbide Upocut Spiral O Flute Cutting Tool

Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.2500" Shank Diameter

by LMT Onsrud
What We like

Round shanks allow use with a wide variety of toolholding systems

more infoarrow_drop_down

Product Features

  • Single flute, 22 degree angle
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging Single flute, 22 degree angle

6
8.6
SCORE
LMT Onsrud 65-010 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000

LMT Onsrud 65-010 Solid Carbide Upcut Spiral O Flute Cutting Tool

Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.2500" Shank Diameter

by LMT Onsrud
What We like

Power Cutting & Sawing

more infoarrow_drop_down

Product Features

  • Country of manufacture: United States
  • Manufacturer: Onsrud

Country of manufacture: united states Manufacturer: onsrud

7
7.5
SCORE
LMT Onsrud 62-726 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000

LMT Onsrud 62-726 Solid Carbide Downcut Spiral O Flute Cutting Tool

Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 3.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter

by LMT Onsrud
What We like

One flute, 21 degree angle

more infoarrow_drop_down

Product Features

  • Country of manufacture: United States
  • Power Cutting & Sawing
  • Manufacturer: Onsrud

Country of manufacture: united states Manufacturer: onsrud Power cutting & sawing

8
7.4
SCORE
LMT Onsrud 63-620 Solid Carbide Upocut Spiral O Flute Cutting TOOL, Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000

LMT Onsrud 63-620 Solid Carbide Upocut Spiral O Flute Cutting TOOL

Inch, Uncoated (Bright) Finish, 22 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter

by LMT Onsrud
What We like

Round shanks allow use with a wide variety of toolholding systems

more infoarrow_drop_down

Product Features

  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Single flute, 22 degree angle
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems Single flute, 22 degree angle When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

9
7.4
SCORE
LMT Onsrud 65-013 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000

LMT Onsrud 65-013 Solid Carbide Upcut Spiral O Flute Cutting Tool

Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.0000" Overall Length, 0.1250" Cutting Diameter, 0.1250" Shank Diameter

by LMT Onsrud
What We like

Round shanks allow use with a wide variety of toolholding systems

more infoarrow_drop_down

Product Features

  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • Single flute, 21 degree angle
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging Single flute, 21 degree angle Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

10
7.4
SCORE
LMT Onsrud 63-775 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.5000

LMT Onsrud 63-775 Solid Carbide Upcut Spiral O Flute Cutting Tool

Inch, Uncoated (Bright) Finish, 21 Degree Helix, 1 Flute, 2.5000" Overall Length, 0.2500" Cutting Diameter, 0.2500" Shank Diameter

by LMT Onsrud
What We like

Round shanks allow use with a wide variety of toolholding systems

more infoarrow_drop_down

Product Features

  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
  • When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
  • Single flute, 21 degree angle
  • Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems

Single flute, 21 degree angle Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging

expand_less

I Agree
We use cookies to enhance and personalise your experience with us by collecting information about the pages you visit and actions taken on the site. More details