Top 10 Best Mosfet Amplifieds with Remote Subwoofers
for June 2021

Recommendations are independently chosen by MOOZ’s editors. Purchases you make through our links may earn us a commission.

1
9.7
SCORE
Acoustic Audio by Goldwood Acoustic Audio ACA10W Powered Amplified 10

Acoustic Audio by Goldwood Acoustic Audio ACA10W Powered Amplified 10" Car Ported Subwoofer 800 Watts with Wiring Kit and Remote Level Control

Black

by Goldwood Sound, Inc.
What We like

Designed in the USA, Professional installation recommended, use for car, Truck and SUV, This Listing and price is for 1 bass speaker, remote bass control, wiring kit and full instructions

more infoarrow_drop_down

Product Features

  • Built in amp has RCA low level inputs and raw wire high level inputs, 40-250hz frequency knob, Gain/volume knob, High efficiency MOSFET switching power supply
  • Acoustic Audio ACA10W powered 10" Loaded ported wedge bass speaker with wiring kit and remote level control, 800W max at 4ohm, 92dB SPL and 40-250hz, separate Mountable remote bass level control
  • Built in automatic thermal/short/overload protection circuitry, LED power and protect lights, power voltage is 13.5V, aviation carpet, fits most vehicles, Dimensions are (LxWxH) 20" X 8.5" X 13"
  • Delivered fully assembled, wiring kit includes the remote bass control module, 16' Remote cable, 3' Ground power cable, 16' Power cable, 16' Rca cable and 16' Remote control cable

Built in automatic thermal/short/overload protection circuitry, led power and protect lights, power voltage is 13.5v, aviation carpet, fits most vehicles, dimensions are (lxwxh) 20" x 8.5" x 13" Built in amp has rca low level inputs and raw wire high level inputs, 40-250hz frequency knob, gain/volume knob, high efficiency mosfet switching power supply Acoustic audio aca10w powered 10" loaded ported wedge bass speaker with wiring kit and remote level control, 800w max at 4ohm, 92db spl and 40-250hz, separate mountable remote bass level control Delivered fully assembled, wiring kit includes the remote bass control module, 16' remote cable, 3' ground power cable, 16' power cable, 16' rca cable and 16' remote control cable

2
9.5
SCORE
BOSS Audio Systems AR1500MK Car Amplifier and 8 Gauge Wiring Kit - 1500 Watts Max Power, 2/4 Ohm Stable, Class AB, Monoblock, Mosfet Power Supply, Remote Subwoofer Control

BOSS Audio Systems AR1500MK Car Amplifier and 8 Gauge Wiring Kit

1500 Watts Max Power, 2/4 Ohm Stable, Class AB, Monoblock, Mosfet Power Supply, Remote Subwoofer Control

by BOSS AUDIO
What We like

: BOSS Audio provides a 6 year Platinum online dealer on the AR1500MK so long as the purchase is made through . We strongly encourage professional Installation of this product to ensure proper and safe functionality

more infoarrow_drop_down

Product Features

  • WIRING INSTALLATION KIT CONTINUED: 10 5/16" and 1/4" Ring Terminals, 6 ft. Split Loom Tubing, 3 Rubber Grommets, 20 4" Wire Ties, 20 ft. High Performance blue RCA (TRCA) Interconnect
  • Wiring Installation Kit includes: 30 ft. speaker wire, 20 ft. 8 ga red power cable, 16 ft. 18 ga blue turn-on wire, 3 ft. 8 ga Black ground cable, competition quality fuse holder with agu fuse
  • Variable low-pass Crossover: subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
  • SPECS: The AR1500M amplifier is 10. 3 x 6. 5 x 2. 6, 7. 5 lbs.
  • Class A/B topology: class A amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class B amplifiers have no current flowing through its outputs with no audio signal

Wiring installation kit continued: 10 5/16" and 1/4" ring terminals, 6 ft. split loom tubing, 3 rubber grommets, 20 4" wire ties, 20 ft. high performance blue rca (trca) interconnect Wiring installation kit includes: 30 ft. speaker wire, 20 ft. 8 ga red power cable, 16 ft. 18 ga blue turn-on wire, 3 ft. 8 ga black ground cable, competition quality fuse holder with agu fuse Mosfet power supply: a mosfet is an electrical switch that allows the flow of electrical current. it controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry Variable low-pass crossover: subwoofers reproduce sound based on a number of different low-range frequencies. you can set exact sound specifications for the bass frequency reproduction Class a/b topology: class a amplifiers have enormous amount of current flowing through its output transistors with no audio signal. class b amplifiers have no current flowing through its outputs with no audio signal Specs: the ar1500m amplifier is 10. 3 x 6. 5 x 2. 6, 7. 5 lbs. Amplifier power: 1500 watts max x 1 @2-ohms, 750 watts max x 1 @4-ohms Switchable bass boost: bass boost allows you to adjust the low bass within the boost range to just the way you like it

3
9.3
SCORE
Planet Audio AC1500.1M Monoblock Car Amplifier - 1500 Watts Max Power, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Remote Subwoofer Control

Planet Audio AC1500.1M Monoblock Car Amplifier

1500 Watts Max Power, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Remote Subwoofer Control

by Planet Audio
What We like

variable bass boost: variable bass boost allows you to adjust the low bass within the boost range to just the way you like it

more infoarrow_drop_down

Product Features

  • low level inputs: line level inputs, also known as rca inputs or low-level inputs, use rca interconnect cables to link the ac1500.1m with the source unit. most aftermarket radios have multiple pairs of rca outputs that can connect to multiple amplifiers
  • high level inputs: speaker level inputs are commonly referred to as high-level inputs. this input will be used to connect the ac1500.1m to your factory radio or aftermarket radio that does not have low-level (rca) inputs
  • low-pass crossover: a low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. a low-pass filter will primarily keep high notes out of your subwoofer(s)
  • power: max power output of 1500 watts at 2 ohms into one channel. maximum power output of 750 watts at 4 ohms into one channel. this amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to

Power: max power output of 1500 watts at 2 ohms into one channel. maximum power output of 750 watts at 4 ohms into one channel. this amplifier is designed to run your subwoofer(s) giving them the power that they need to perform as they were meant to Low level inputs: line level inputs, also known as rca inputs or low-level inputs, use rca interconnect cables to link the ac1500.1m with the source unit. most aftermarket radios have multiple pairs of rca outputs that can connect to multiple amplifiers Low-pass crossover: a low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. a low-pass filter will primarily keep high notes out of your subwoofer(s) High level inputs: speaker level inputs are commonly referred to as high-level inputs. this input will be used to connect the ac1500.1m to your factory radio or aftermarket radio that does not have low-level (rca) inputs

4
9.1
SCORE
BOSS Audio Systems R1100MK Car Amplifier and 8 Gauge Wiring Kit - 1100 Watts Max Power, 2-4 Ohm Stable, Class A/B, Monoblock, Mosfet Power Supply, Remote Subwoofer Control

BOSS Audio Systems R1100MK Car Amplifier and 8 Gauge Wiring Kit

1100 Watts Max Power, 2-4 Ohm Stable, Class A/B, Monoblock, Mosfet Power Supply, Remote Subwoofer Control

by BOSS AUDIO
What We like

Switchable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it

more infoarrow_drop_down

Product Features

  • Wiring Kit Continued - 10 5/16" and 1/4" Ring Terminals, 6 ft. Split Loom Tubing, 3 Rubber Grommets, 20 4" Wire Ties, 20 ft. High Performance blue RCA (TRCA) Interconnect
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry
  • Wiring Kit - 30 Ft Speaker Wire, 20 ft. 8 GA Red Power Cable, 16 ft. 18 GA Blue Turn-On Wire, 3 ft. 8 GA Black Ground Cable, Competition Quality Fuse Holder with AGU Fuse
  • Class A/B Topology - Class A amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class B amplifiers have no current flowing through its outputs with no audio signal
  • Amplifier Power - 1100 Watts Max x 1 @2-Ohms, 550 Watts Max x 1 @4-Ohms

Specs - dimensions: 9.1 x 10.4 x 2.3, weight: 4.4 lbs. Mosfet power supply - a mosfet is an electrical switch that allows the flow of electrical current. it controls the output voltage and current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry Wiring kit continued - 10 5/16" and 1/4" ring terminals, 6 ft. split loom tubing, 3 rubber grommets, 20 4" wire ties, 20 ft. high performance blue rca (trca) interconnect Class a/b topology - class a amplifiers have enormous amount of current flowing through its output transistors with no audio signal. class b amplifiers have no current flowing through its outputs with no audio signal Amplifier power - 1100 watts max x 1 @2-ohms, 550 watts max x 1 @4-ohms Variable low-pass crossover - subwoofers reproduce sound based on a number of different low-range frequencies. you can set exact sound specifications for the bass frequency reproduction Wiring kit - 30 ft speaker wire, 20 ft. 8 ga red power cable, 16 ft. 18 ga blue turn-on wire, 3 ft. 8 ga black ground cable, competition quality fuse holder with agu fuse

5
8.7
SCORE
Planet Audio PA8W Amplified Car Subwoofer - 800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space

Planet Audio PA8W Amplified Car Subwoofer

800 Watts Max Power, Low Profile, 8 Inch Subwoofer, Remote Subwoofer Control, Great for Vehicles That Need Bass But Have Limited Space

by Planet Audio
What We like

- Planet Audio provides a Powerful 3 Year Platinum Online Dealer so long as the purchase is made through . We strongly encourage professional installation of this product to ensure proper and safe functionality

more infoarrow_drop_down

Product Features

  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the PA8W to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
  • Low Level Inputs - Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the PA8W with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it

Built-in amplifier - a built-in 800 max watt amplifier powers the subwoofer Variable bass boost - variable bass boost allows you to adjust the low bass within the boost range to just the way you like it Variable gain control - the gain control is not for adjusting volume. it simply adjusts the amount of signal that is coming from your receiver and going to your amplifier Low level inputs - line level inputs, also known as rca inputs or low-level inputs, use rca interconnect cables to link the pa8w with the source unit. most aftermarket radios have multiple pairs of rca outputs that can connect to multiple amplifiers High level inputs - speaker level inputs are commonly referred to as high-level inputs. it will be used to connect the pa8w to your factory radio or an aftermarket radio that does not have low-level (rca) inputs Specs - dimensions: 13. 78 x 9. 84 x 2. 95, weight: 13. 8 lbs. if you are short on space, this is a great solution for you. the combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles Variable low-pass filter - a low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. you will use the low-pass filter to primarily keep high notes out of your subwoofer(s) Mosfet power supply - with a mosfet power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies

6
8.6
SCORE
DS18 GEN-X2000.4D Full Range Bridgeable 4-Channel 2000w Peak/180w x 4 RMS @ 2 Ohm CEA Compliant 2, 4 Ohm Stable Class A/B Mono Car Amplifier with Remote Subwoofer Control

DS18 GEN-X2000.4D Full Range Bridgeable 4-Channel 2000w Peak/180w x 4 RMS @ 2 Ohm CEA Compliant 2

4 Ohm Stable Class A/B Mono Car Amplifier with Remote Subwoofer Control

by DS18Sound (Automotive Dummy vendor code for NIS)
What We like

Designed, Engineered, Developed, and Quality Controlled in the USA - Minimum THD at Rated Power: 98dB. Under Voltage Protection at 10V. Over Voltage Protection at 15V. Frequency Response: 20Hz - 20KHz. Fuse Rating 35A x 3

more infoarrow_drop_down

Product Features

  • Molded power terminals have the highest current draw in the industry and they also look way nicer than other terminal styles. Power and Protection LED Indicator. LED Illuminated Logo. Dimensions: (L x W x H) 488 x 190 x 60 mm
  • High-Speed MOSFET Power Supply Optical Coupler Class "A/B" Technology. Fully Adjustable 12dB. Low Pass Filter: 50Hz - 500Hz. High Pass Filter: 50Hz - 500Hz. Phase Control Switch. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control.
  • DS18 GEN-X2000.4D has the following RMS power: at 2 Ohms 180 watts / at 4 Ohms 120 watts / Bridge Powered at 4 Ohm 300 watts - THD Distortion 0.08%
  • IN THE BOX - Amplifier, Bass Remote, Owner's Manual, & Mounting Screws.

High-speed mosfet power supply optical coupler class "a/b" technology. fully adjustable 12db. low pass filter: 50hz - 500hz. high pass filter: 50hz - 500hz. phase control switch. full ic-controlled protection circuitry. remote dashboard subwoofer control. In the box - amplifier, bass remote, owner's manual, & mounting screws. Molded power terminals have the highest current draw in the industry and they also look way nicer than other terminal styles. power and protection led indicator. led illuminated logo. dimensions: (l x w x h) 488 x 190 x 60 mm Ds18 gen-x2000.4d has the following rms power: at 2 ohms 180 watts / at 4 ohms 120 watts / bridge powered at 4 ohm 300 watts - thd distortion 0.08%

7
8.5
SCORE
Sound Storm Laboratories LOPRO10 Amplified Car Subwoofer - 1200 Watts Max Power, Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, Great For Vehicles Needing Bass But Have Limited Space

Sound Storm Laboratories LOPRO10 Amplified Car Subwoofer

1200 Watts Max Power, Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, Great For Vehicles Needing Bass But Have Limited Space

by Sound Storm Laboratories
What We like

: sound storm provides a powerful 3-year Platinum online dealer so long as the purchase is made through . We strongly encourage Professional installation of this product to ensure proper and safe functionality

more infoarrow_drop_down

Product Features

  • Dimensions: 15 x 9. 75 x 3. If you are short on space, This is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles
  • Built-in amplifier: with a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies
  • Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • Variable bass boost: variable bass boost allows you to adjust the low bass within the boost Range to just the way you like it
  • High level inputs: speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs

Dimensions: 15 x 9. 75 x 3. if you are short on space, this is a great solution for you. the combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles Low-level inputs - line level inputs (rca inputs / low-level inputs) use rca interconnect cables to link the lopro10 with the source unit. most aftermarket radios have multiple pairs of rca outputs that can connect to multiple amplifiers High level inputs: speaker level inputs are commonly referred to as high-level inputs. it will be used to connect the lopro10 to your factory radio or an aftermarket radio that does not have low-level (rca) inputs Variable low-pass filter - a low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. you will use the low-pass filter to primarily keep high notes out of your subwoofer(s) Variable bass boost: variable bass boost allows you to adjust the low bass within the boost range to just the way you like it Built-in amplifier: with a mosfet power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies

8
7
SCORE
ASC Package Dual 12

American Sound Connection ASC Package Dual 12" Kicker Sub Box Regular Cab Truck Subwoofer Enclosure C12 Comp 600 Watts Peak

by American Sound Connection
What We like

ASC Package Dual 12" Kicker Sub Box Regular Cab Truck Subwoofer Enclosure C12 Comp 600 Watts Peak

more infoarrow_drop_down
9
7
SCORE
Rockville USS8 8

Rockville USS8 8" 600w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub

by Rockville
What We like

Signal to Noise Ratio >82dB. Sensitivity: 90dB at 1w / 1m. Input sensitivity, RCA level 195mV. Input sensitivity, HIGH level 5.6V.

more infoarrow_drop_down

Product Features

  • Rockville USS8 8" 600w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub. 600 Watts Peak / 150 Watts RMS. Heavy Duty Mounting Feet. PWM MOSFET Power Supply. Low Level RCA Input.
  • Phase Switch: 0 Degree or 180 Degree. Low Pass Filter: 50Hz - 150Hz. Bass Boost: 0 - 12dB at 45Hz. Subsonic Filter: 20Hz - 50Hz. THD < 0.15%. Subwoofer Level Remote Control. Fuse Rating: Single 20A.
  • High Level Inputs with Auto Turn-On Technology. Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit. Green Power/Red Protect LED.
  • Specifications: Maximum Power RMS: 150 Watts. Impedance: 3 Ohm. Dimensions: 13.6 x 9.9 x 2.9 (L x W X H) Inches. Frequency Response: 15Hz - 125Hz.

Specifications: maximum power rms: 150 watts. impedance: 3 ohm. dimensions: 13.6 x 9.9 x 2.9 (l x w x h) inches. frequency response: 15hz - 125hz. Rockville uss8 8" 600w slim under-seat active powered car/truck subwoofer sub. 600 watts peak / 150 watts rms. heavy duty mounting feet. pwm mosfet power supply. low level rca input. Phase switch: 0 degree or 180 degree. low pass filter: 50hz - 150hz. bass boost: 0 - 12db at 45hz. subsonic filter: 20hz - 50hz. thd < 0.15%. subwoofer level remote control. fuse rating: single 20a. High level inputs with auto turn-on technology. adjustable input sensitivity. soft delayed remote turn-on. thermal protection circuit, short protection circuit. green power/red protect led.

10
7
SCORE
Rockville SS8P 400 Watt Slim Under-Seat Powered Car/Truck Subwoofer Sub+Amp Kit

Rockville SS8P 400 Watt Slim Under-Seat Powered Car/Truck Subwoofer Sub+Amp Kit

by Rockville
What We like

Features of RWK10: Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit, (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable, 17' 10 Gauge Translucent Blue SuperFlex Power Cables, 17 18 Gauge Blue Remote Cable, 17 16 Gauge Clear Speaker Wire, 3' 10 Gauge Clear SuperFlex Ground Wire, Gold Plated AGU Heat Resistant Fuse Holder, 40 Amp ATU Inline Fuse, 7 Split Tube Loom, Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets

more infoarrow_drop_down

Product Features

  • Package Includes: (1) Rockville SS8P 400 Watt Slim Under-Seat Active Powered Car/Truck Subwoofer Sub, (1) Rockville RWK10 10 Gauge Amp Installation Kit ANL Fuse Holder 100% Copper RCA
  • Features of SS8P: Rockville SS8P 8" 400w Slim Under-Seat Active Powered Car/Truck Subwoofer Sub, Enclosure is made out of cast aluminum which stays cool at all times, Peak Power Handling: 400 Watts, RMS Power Handling: 100 Watts, Heavy Duty Mounting Feet, PWM MOSFET Power Supply, Low Level RCA Input, High Level Inputs with Auto Turn-On Technology, Adjustable Input Sensitivity, Soft Delayed Remote Turn-On, Thermal Protection Circuit, Short Protection Circuit, Overload Protection Circuit
  • Green Power/Red Protect LED, Phase Switch: 0 or 180, Low Pass Filter: 50Hz - 150Hz, Bass Boost: 0 - 12dB @ 45Hz, Built in Subsonic Filter @ 20Hz, THD: < 0.4%, Subwoofer Level Remote Control, Fuse Rating: Single 10A
  • Specifications of SS8P: Peak Power 400 Watts, RMS Power: 100 Watts, Impedance: 2 Ohm, Dimensions (L x W X H): 11.4" x 8.3" x 2.8" Inches, Frequency Response: 20Hz - 150Hz, Signal to Noise Ratio: >90dB, Sensitivity: 90dB @ 1w / 1m, Input sensitivity, Low level: 300mV, Input sensitivity, High level: 1.0V

Green power/red protect led, phase switch: 0 or 180, low pass filter: 50hz - 150hz, bass boost: 0 - 12db @ 45hz, built in subsonic filter @ 20hz, thd: < 0.4%, subwoofer level remote control, fuse rating: single 10a Package includes: (1) Rockville ss8p 400 watt slim under-seat active powered car/truck subwoofer sub, (1) Rockville rwk10 10 gauge amp installation kit anl fuse holder 100% copper rca Specifications of ss8p: peak power 400 watts, rms power: 100 watts, impedance: 2 ohm, dimensions (l x w x h): 11.4" x 8.3" x 2.8" inches, frequency response: 20hz - 150hz, signal to noise ratio: >90db, sensitivity: 90db @ 1w / 1m, input sensitivity, low level: 300mv, input sensitivity, high level: 1.0v Features of ss8p: Rockville ss8p 8" 400w slim under-seat active powered car/truck subwoofer sub, enclosure is made out of cast aluminum which stays cool at all times, peak power handling: 400 watts, rms power handling: 100 watts, heavy duty mounting feet, pwm mosfet power supply, low level rca input, high level inputs with auto turn-on technology, adjustable input sensitivity, soft delayed remote turn-on, thermal protection circuit, short protection circuit, overload protection circuit

expand_less

I Agree
We use cookies to enhance and personalise your experience with us by collecting information about the pages you visit and actions taken on the site. More details