Top 10 Best Made in USA Vises
for November 2021

Recommendations are independently chosen by MOOZ’s editors. Purchases you make through our links may earn us a commission.

1
9.9
SCORE
Made in USA The Original 11SP Vise Grip Locking Clamp with Swivel Pads, 2-Pack

Vise-Grip US Made in USA The Original 11SP Vise Grip Locking Clamp with Swivel Pads

2-Pack

by Vise-Grip US
What We like

Locking Clamp with Swivel Pads.

more infoarrow_drop_down
2
9.7
SCORE
TEMCo WC0050-10' (5' Blk, 5' Red) 1/0 Gauge AWG Welding Lead & Car Battery Cable Copper Wire BLACK + RED | MADE IN USA

TEMCo Industrial TEMCo WC0050-10' (5' Blk, 5' Red) 1/0 Gauge AWG Welding Lead & Car Battery Cable Copper Wire BLACK + RED

MADE IN USA

by TEMCo
What We like

NEC article 630 electric welders, Meets SAE J1127 and ASTM B-172 standards. RoHS Compliant.

more infoarrow_drop_down

Product Features

  • 285 Max Amps (up to 50 feet), Rated up to 600 volts, -50C to +105C (-58F to +221F)
  • Nominal OD: 0.526", Conductor stranding: 975/44
  • TEMCo Easy-Flex has a rugged EPDM jacket and is highly flexible. Annealed 30 gauge bare copper conductor.
  • Resistant to Cuts, Tears, Abrasion, Water, Oil, Grease and Flame.

TEMCo easy-flex has a rugged epdm jacket and is highly flexible. annealed 30 gauge bare copper conductor. 285 max amps (up to 50 feet), rated up to 600 volts, -50c to +105c (-58f to +221f) Resistant to cuts, tears, abrasion, water, oil, grease and flame. Nominal od: 0.526", conductor stranding: 975/44

3
9.4
SCORE
Fulton Spring Clamp Pliers with 13 Spring Clamps and Hip Clip Made in the USA

Fulton Spring Clamp Pliers with 13 Spring Clamps and Hip Clip Made in the USA

by Fulton Woodworking Tools and Accessories
What We like

The Fulton Miter Spring Clamps are the ideal and cost effective way to quickly and easily clamp mitered corners without all of the hassle you typically have with other clamps. The Spring Miter Clamps are made from a high strength steel. The clamps can be applied using your hand to squeeze the clamp to open the sharp, pointed tips or you can use the Miter Spring Pliers to make it super easy to to spread the tips apart.

more infoarrow_drop_down

Product Features

  • These spring miter clamps are perfect for carpenters, contractors, woodworking enthusiasts, art and craft hobbyists and more. Clamp picture frames, moldings, octagons and more with confidence. The clamps work perfectly with the Fulton Miter Spring Pliers and can be used on a wide variety of of wooden materials. Made in the USA
  • Once you have the clamp tips spread apart, simply place the spring clamp onto the mitered corner you need to secure, then release the clamp so the tips pierce into the wood and keep your stock in place. Depending on the size of your project, you may need to use more than one spring clamp on each corner to hold your stock in place.
  • If you have ever attempted to firmly secure and clamp mitered corners then you know what kind of a challenge it can be to say the least. You could always try those large, cumbersome and very expensive parallel clamps to try and work each corner just right to hold your mitered corners together. That too can be extremely challenging and not to mention very costly.
  • Unlike other available spring clamps, the Fulton Miter Spring Clamps dont cut into your stock piece. The uniquely designed tips are designed to pierce the wood so that there is minimal visible evidence of the clamps being used after you remove them. Other brands of spring clamp use a one sided cut on the clamp tip which pushes, cuts and tears at the wood which tends to leave harsh looking blemishes once the clamp is removed.

These spring miter clamps are perfect for carpenters, contractors, woodworking enthusiasts, art and craft hobbyists and more. clamp picture frames, moldings, octagons and more with confidence. the clamps work perfectly with the fulton miter spring pliers and can be used on a wide variety of of wooden materials. made in the usa If you have ever attempted to firmly secure and clamp mitered corners then you know what kind of a challenge it can be to say the least. you could always try those large, cumbersome and very expensive parallel clamps to try and work each corner just right to hold your mitered corners together. that too can be extremely challenging and not to mention very costly. Once you have the clamp tips spread apart, simply place the spring clamp onto the mitered corner you need to secure, then release the clamp so the tips pierce into the wood and keep your stock in place. depending on the size of your project, you may need to use more than one spring clamp on each corner to hold your stock in place. Unlike other available spring clamps, the fulton miter spring clamps dont cut into your stock piece. the uniquely designed tips are designed to pierce the wood so that there is minimal visible evidence of the clamps being used after you remove them. other brands of spring clamp use a one sided cut on the clamp tip which pushes, cuts and tears at the wood which tends to leave harsh looking blemishes once the clamp is removed.

4
9
SCORE
ROCKETSOCKET | Made in USA | Extraction Socket Set | Remove Damaged, Frozen, Rusted, Rounded-Off Bolts, Nuts & Screws | 13 Pieces, Impact Grade | 100% American Steel

ROCKETSOCKET

Made in USA, Extraction Socket Set, Remove Damaged, Frozen, Rusted, Rounded-Off Bolts, Nuts & Screws, 13 Pieces, Impact Grade, 100% American Steel

by ROCKETSOCKET
What We like

MADE IN AMERICA WITH 100% USA STEEL - All RocketSocket impact grade extractor socket sets are designed and manufactured in the USA to meet or exceed all professional tool standards. Don't be fooled by quality claims from cheap "imported" extractor sockets. Trust the original and the best, Trust RocketSocket!

more infoarrow_drop_down

Product Features

  • SUPERIOR REMOVAL TECHNOLOGY Only RocketSocket has proven RazorGrip removal technology that grips and wont let go. With proven RazorGrip Removal Technology, the more you turn, the tighter the socket grips! That means no more slipping and no busted knuckles.
  • IMPACT STRENGTH Because RocketSockets are designed and engineered to be used with your favorite power tool or impact wrench we include a convenient hex adapter. Our 13 piece set uses a 3/8" drive and covers 20 of the most used and requested standard and metric sizes. SAE: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4" Metric: 6mm, 8mm, 10mm, 11mm, 12mm, 13mm, 14mm, 16mm, 17mm, 18mm, 19mm.
  • REMOVES STRIPPED, DAMAGED & BROKEN FASTENERS RocketSockets are precision engineered to easily extract damaged bolts, nuts and screws even if they are stripped, rusted or frozen. You can depend on RocketSocket quality to make every job faster, safer and a lot less frustrating!

Impact strength because ROCKETSOCKETs are designed and engineered to be used with your favorite power tool or impact wrench we include a convenient hex adapter. our 13 piece set uses a 3/8" drive and covers 20 of the most used and requested standard and metric sizes. sae: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4" metric: 6mm, 8mm, 10mm, 11mm, 12mm, 13mm, 14mm, 16mm, 17mm, 18mm, 19mm. Superior removal technology only ROCKETSOCKET has proven razorgrip removal technology that grips and wont let go. with proven razorgrip removal technology, the more you turn, the tighter the socket grips! that means no more slipping and no busted knuckles. Removes stripped, damaged & broken fasteners ROCKETSOCKETs are precision engineered to easily extract damaged bolts, nuts and screws even if they are stripped, rusted or frozen. you can depend on ROCKETSOCKET quality to make every job faster, safer and a lot less frustrating!

5
8.8
SCORE
Collins Tool Spring Loaded Pliers and 4 Miter Clamp Kit - Proudly Made in The USA

Collins Tool Company Collins Tool Spring Loaded Pliers and 4 Miter Clamp Kit

Proudly Made in The USA

by Collins Tool Company
What We like

Great for picture frames, moldings, trim work and any compound miter

more infoarrow_drop_down

Product Features

  • Keeps any mitered corner from opening up while glue dries for the perfect finish
  • Miter clamps spread from 0 to approximately 2 inches. No need to carry a bunch of different sizes
  • Spring Loaded Pliers and 4 spring miter clamps included
  • Sharp point pierces the wood without cutting wood fibers vs the competitions angled cut

Spring loaded pliers and 4 spring miter clamps included Keeps any mitered corner from opening up while glue dries for the perfect finish Miter clamps spread from 0 to approximately 2 inches. no need to carry a bunch of different sizes Sharp point pierces the wood without cutting wood fibers vs the competitions angled cut

6
8.8
SCORE
Yost 5

Yost Tools Yost 5" Heavy-Duty Bench Vise

Double Swivel Rotating Vise: Head Rotates 360° Vertically, Body Rotates 360° Horizontally In The Interlocking Geared Swivel Base, (Model 750-E; 1-Pack)

by Yost Tools
What We like

Durable Rotating head constructed in 60,000 PSI ductile iron, stationary body cast in 30,000 PSI cast (grey) iron

more infoarrow_drop_down

Product Features

  • Casting Clamp force: 7,000 lbs. and Torque rating: 165 Ft-Lb
  • Machined Q235 steel main screw 0. 74"D with rolled single acme threads at 4 threads per inch
  • 360-degree interlocking (geared) swivel base with (2) lock downs adjusts the direction of the jaws for proper placement
  • 360 degrees Rotating Head For Clamping Material At Any Angle
  • Large 3.2" x 2.5 (8.1CM x 6.3CM) anvil work surface for flat shaping

0.5"d x 7. 48" long handle 360-degree interlocking (geared) swivel base with (2) lock downs adjusts the direction of the jaws for proper placement Casting clamp force: 7,000 lbs. and torque rating: 165 ft-lb Jaw width: 5" (12.7cm) x jaw opening: 4-7/8" (12.4cm) x throat depth: 3" (7.6cm) x pipe capacity: 0.5"d x 2.5"d (1.3 x 6.4cm) Large 3.2" x 2.5 (8.1cm x 6.3cm) anvil work surface for flat shaping Three (3) different sets of jaws for gripping parts: machinist jaws, pipe jaws and v-jaws. Machined q235 steel main screw 0. 74"d with rolled single acme threads at 4 threads per inch 360 degrees rotating head for clamping material at any angle Base mounting tabs: (4) x 0.5"d, mounting hardware not included.

7
8.8
SCORE
Wilton 28807 1765 Trademan Vise 6-1/2In

Wilton Tools Wilton 28807 1765 Trademan Vise 6-1/2In

by Wilton
What We like

DURABILITY: Machined steel serrated jaws with phosphate coating provide increased durability and an extended life of use

more infoarrow_drop_down

Product Features

  • PRECISION SLIDE BAR: Eliminates movement in the front jaw regardless of opened distance
  • ENCLOSED DESIGN: Keeps lubrication in and contaminants out for a lifetime of smooth operation
  • REDESIGNED SPINDLE: Improves overall product life and durability
  • PREVENT MARRING: Reversible jaw inserts are serrated on one side for extra grip and smooth on the other to prevent marring on softer surfaces

Precision slide bar: eliminates movement in the front jaw regardless of opened distance Prevent marring: reversible jaw inserts are serrated on one side for extra grip and smooth on the other to prevent marring on softer surfaces Redesigned spindle: improves overall product life and durability Enclosed design: keeps lubrication in and contaminants out for a lifetime of smooth operation

8
8.8
SCORE
Yost Tools Vises 445 4.5

Yost Tools Vises 445 4.5" Heavy-Duty Utility Combination Pipe and Bench Vise

Blue

by Yost Tools
What We like

Base mounting tabs: (4) x 7/16"D

more infoarrow_drop_down

Product Features

  • Clamp force: 3, 150 lbs. and Torque rating: 73 Ft-Lb
  • Pipe Capacity: 1/8" x 2" Diameter, pipe jaws are cast-in place
  • Machined steel main screw with rolled threads
  • 2. 64" x 2. 52" pounding surface
  • Replaceable Hardened Steel Serrated (Top) Jaws

High-strength steel bar and 30, 000 psi cast iron vise components Machined steel main screw with rolled threads 2. 64" x 2. 52" pounding surface 0. 43"d x 6. 5"long handle with rubber bumpers Clamp force: 3, 150 lbs. and torque rating: 73 ft-lb Jaw width: 4. 5" x jaw opening: 4" x throat depth: 2. 62" Replaceable hardened steel serrated (top) jaws 360-degree swivel base with (2) lock downs adjusts the direction of the jaws for proper placement Pipe capacity: 1/8" x 2" diameter, pipe jaws are cast-in place

9
8.6
SCORE
Channellock 338 8-Inch High Leverage Diagonal Cutting Plier | Knife and Anvil-Style Cutting Edge is Laser Heat-Treated for Extended Tool Life | Forged from High Carbon Steel | Made in the USA

Channellock 338 8-Inch High Leverage Diagonal Cutting Plier

Knife and Anvil-Style Cutting Edge is Laser Heat-Treated for Extended Tool Life, Forged from High Carbon Steel, Made in the USA

by Channellock
What We like

Package height:1.0"

more infoarrow_drop_down

Product Features

  • Package width:2.3"
  • Package length:8.2"
  • Country of Origin:United States

Package width:2.3" Package length:8.2" Country of origin:united states

10
8.6
SCORE
Yost Vises 6D 6

Yost Tools Yost Vises 6D 6" Heavy-Duty Drill Press Vise with Stationary Base

Made in US

by Yost Vises
What We like

Drill press vise with stationary base and 6" nominal jaw width provides clamping action for heavy-duty drilling applications

more infoarrow_drop_down

Product Features

  • Made in USA and meets Fed. Spec. GGG-V-443-A Type I, Class 2, Style C and qualifies as NSN 3460-00-293-0272
  • Cast ductile iron for precision and high strength
  • Stationary jaw has a horizontal and vertical V-groove for enhanced grip of circular stock
  • Stationary base creates a firm foundation when mounted to a drill press bench

Cast ductile iron for precision and high strength Made in usa and meets fed. spec. ggg-v-443-a type i, class 2, style c and qualifies as nsn 3460-00-293-0272 Stationary base creates a firm foundation when mounted to a drill press bench Stationary jaw has a horizontal and vertical v-groove for enhanced grip of circular stock

expand_less

I Agree
We use cookies to enhance and personalise your experience with us by collecting information about the pages you visit and actions taken on the site. More details