Top 10 Best JBL Home Amplifiers
for September 2021

Recommendations are independently chosen by MOOZ’s editors. Purchases you make through our links may earn us a commission.

1
9.9
SCORE
(4) JBL 3

(4) JBL 3" 15w 70v In-Ceiling Speakers+JBL Amplifier For Hotel/Office/Diner

by JBL
What We like

Rack mounting hardware included. Product Dimensions (W x D x H): 17" x 16.3" x 3.5" inches. Product Weight: 19.4 Lbs.. Pair JBL CONTROL 12C/T 3" 15w 70v In-Ceiling Speakers For Restaurant/Bar/Cafe. 76 mm (3 in) full-range driver. Blind-mount backcan for quick and easy install. Combined 70V/100V and low impedance direct operation: 20 Watts at 8? nominal setting and 15W multi-tap at 70V/100V. 68 Hz 17 kHz bandwidth with wide 130 coverage. Color: White. Frequency Range (-10 dB) 68 Hz 17 kHz

more infoarrow_drop_down

Product Features

  • Package Includes: (1) JBL VMA160 60-Watt 70 Volt 70V Mixer/Amplifier with Bluetooth 5 Channel Inputs. (2) Pair of JBL CONTROL 12C/T 3" 15w 70v In-Ceiling Speakers For Restaurant/Bar/Cafe. Features: JBL VMA160 60 Watt 70V Mixer/Amplifier with Bluetooth and 5 Channel Inputs. Max Output Power: 60 Watts. Frequency Response: 20 Hz - 20 kHz. THD (Total Harmonic Distortion): 76 dB. Input Impedance: Mic: 400 Ohms Line: 20 kOhms (balanced) RCA: 50 kOhms
  • Phantom Power: 27VDC. Crosstalk: -70 dB. Nominal AC Line Voltages: 100V, 120V, 220V, 220-240V, 50/60 Hz. Minimum Load Impedance: 4 Ohms, 80 Ohms,160 Ohms. Insertion Loss: 1 dB Maximum. Number of Inputs: 5. Number of Outputs: 1. Tone Control: Bass +/-14dB @ 50Hz; Treble +/-14dB @10kHz. Input Sensitivity: Mic Input: 5.5mVRMS Line Input: 1.3VRMS RCA Input (stereo in): 130mVRMS. Independent bass and treble controls for each output channel. Paging Chime, and Priority Muting
  • Power Capacity (at low-Z) 40 Watts Continuous Program Power. 20 Watts Continuous Pink Noise. Transformer Taps 15 W, 7.5 W, 3.8 W @ 70V and 100V. (& 1.9 W @ 70V only). Frequency Response (3 dB) 95 Hz 15 kHz. Nominal Sensitivity 84 dB. Nominal Coverage Angle 130 conical coverage. Directivity Factor (Q) 9.8. Directivity Index (DI) 7.4 dB. Rated Maximum SPL 97 dB @ 1 m (3.3 ft) average, 103 dB peak. Nominal Impedance 8 ohms (in direct/bypass 8? setting)
  • Full-Range Driver 76 mm (3 inch) with polypropylene cone, butyl rubber surround, Kapton voice coil former, high temperature voice coil, aluminum coupling ring for low distortion and HF extension. Input Connectors Removable locking 4-pin connector with screw-down terminals.. Max wire size 12 AWG (2.5 mm2). Connector Wiring Pin 1 = + In; Pin 2 = - In; Pin 3 = + Loop Thru; Pin 4 = - Loop Thru. Strain Reliefs Strain relief for two cables or two flex conduits via coupled clamping mechanism

Power capacity (at low-z) 40 watts continuous program power. 20 watts continuous pink noise. transformer taps 15 w, 7.5 w, 3.8 w @ 70v and 100v. (& 1.9 w @ 70v only). frequency response (3 db) 95 hz 15 khz. nominal sensitivity 84 db. nominal coverage angle 130 conical coverage. directivity factor (q) 9.8. directivity index (di) 7.4 db. rated maximum spl 97 db @ 1 m (3.3 ft) average, 103 db peak. nominal impedance 8 ohms (in direct/bypass 8? setting) Full-range driver 76 mm (3 inch) with polypropylene cone, butyl rubber surround, kapton voice coil former, high temperature voice coil, aluminum coupling ring for low distortion and hf extension. input connectors removable locking 4-pin connector with screw-down terminals.. max wire size 12 awg (2.5 mm2). connector wiring pin 1 = + in; pin 2 = - in; pin 3 = + loop thru; pin 4 = - loop thru. strain reliefs strain relief for two cables or two flex conduits via coupled clamping mechanism Phantom power: 27vdc. crosstalk: -70 db. nominal ac line voltages: 100v, 120v, 220v, 220-240v, 50/60 hz. minimum load impedance: 4 ohms, 80 ohms,160 ohms. insertion loss: 1 db maximum. number of inputs: 5. number of outputs: 1. tone control: bass +/-14db @ 50hz; treble +/-14db @10khz. input sensitivity: mic input: 5.5mvrms line input: 1.3vrms rca input (stereo in): 130mvrms. independent bass and treble controls for each output channel. paging chime, and priority muting Package includes: (1) JBL vma160 60-watt 70 volt 70v mixer/amplifier with bluetooth 5 channel inputs. (2) pair of JBL control 12c/t 3" 15w 70v in-ceiling speakers for restaurant/bar/cafe. features: JBL vma160 60 watt 70v mixer/amplifier with bluetooth and 5 channel inputs. max output power: 60 watts. frequency response: 20 hz - 20 khz. thd (total harmonic distortion): 76 db. input impedance: mic: 400 ohms line: 20 kohms (balanced) rca: 50 kohms

2
9.6
SCORE
(8) JBL 3

(8) JBL 3" 15w 70v In-Ceiling Speakers+JBL Amplifier For Restaurant/Bar/Cafe

by JBL
What We like

Package Includes: (1) JBL VMA1120 Commercial/Restaurant 120W 70v Bluetooth Mixer/Amplifier, 5 Inputs. (4) Pair of JBL CONTROL 12C/T 3" 15w 70v In-Ceiling Speakers For Restaurant/Bar/Cafe. Features: JBL VMA1120 Commercial/Restaurant 120 Watt Bluetooth Mixer/Amplifier with 5 Inputs. 5-Input Mixer. Supports USB Drives and Bluetooth. 120W, 1-Output Amplifier. Euroblock, RCA, and 1/4" Inputs. Euroblock Outputs. Per-Channel Bass and Treble Controls. Voice-Activated Ducking

more infoarrow_drop_down

Product Features

  • Storage Temperature: -4F to 185F. Product Dimensions (W x D x H): 17" x 16.3" x 3.5" inches. Product Weight: 20.2 Lbs.. Tone Control: Bass and Treble non-detented potentiometers on each channel. Bass: 14 dB @ 50 Hz. Treble: 14 dB @ 10 kHz. Input Sensitivity: Mic Input: 5.5 mVrms. Line Input: 1.3 Vrms. RCA Input (Stereo In): 130 mVrms. Frequency Response: Measured at 2.83 Vrms into rated load impedance at any output. 4/8 Ohms Output: 20 Hz to 20 kHz, 2 dB
  • Input Sensitivity: Mic Input: 5.5 mVrms Line Input: 1.3 Vrms RCA Input (Stereo In): 130 mVrms. Mic Input: 5.5 mVrms. Line Input: 1.3 Vrms. RCA Input (Stereo In): 130 mVrms. Frequency Response: Measured at 2.83 Vrms into rated load impedance at any output 4/8 Ohms Output: 20 Hz to 20 kHz, 2 dB 70 V/100 V Outputs: 80 Hz to 15 kHz 3 dB. 4/8 Ohms Output: 20 Hz to 20 kHz, 2 dB. 70 V/100 V Outputs: 80 Hz to 15 kHz 3 dB. Total Harmonic Distortion (THD): Power Amp Output:
  • Signal to Noise Ratio: >76 dB. Input Impedance: Mic: 400 Ohms Line: 20k Ohms RCA: 50k Ohms. Mic: 400 Ohms. Line: 20k Ohms. RCA: 50k Ohms. Phantom Power: 27 VDC. Crosstalk: -70 dB. Nominal Input Voltages: Nominal AC Line Voltages: 100, 120, 220, 220 to 240 VAC, 50/60 Hz. Minimum Load Impedance: Low Impedance Output: 4 Ohms 70 V Output: 40 Ohms 100 V Output: 80 Ohms. Low Impedance Output: 4 Ohms. 70 V Output: 40 Ohms. 100 V Output: 80 Ohms. Operating Temperature: 32F to 95F. Humidity: 95% RH
  • Front-Panel Display and Controls. Configurable Output Routing. Includes Rack Mount Kit. Specifications: Output Power Per Channel: 120 Watts into 4 Ohms or 8 Ohms. Insertion Loss: 70 V and 100 V Outputs: 1 dB Max.. Input Channels: 5. Output Channels: 1. Tone Control: Bass and Treble non-detented potentiometers on each channel Bass: 14 dB @ 50 Hz Treble: 14 dB @ 10 kHz. Bass: 14 dB @ 50 Hz. Treble: 14 dB @ 10 kHz

Input sensitivity: mic input: 5.5 mvrms line input: 1.3 vrms rca input (stereo in): 130 mvrms. mic input: 5.5 mvrms. line input: 1.3 vrms. rca input (stereo in): 130 mvrms. frequency response: measured at 2.83 vrms into rated load impedance at any output 4/8 ohms output: 20 hz to 20 khz, 2 db 70 v/100 v outputs: 80 hz to 15 khz 3 db. 4/8 ohms output: 20 hz to 20 khz, 2 db. 70 v/100 v outputs: 80 hz to 15 khz 3 db. total harmonic distortion (thd): power amp output: Signal to noise ratio: >76 db. input impedance: mic: 400 ohms line: 20k ohms rca: 50k ohms. mic: 400 ohms. line: 20k ohms. rca: 50k ohms. phantom power: 27 vdc. crosstalk: -70 db. nominal input voltages: nominal ac line voltages: 100, 120, 220, 220 to 240 vac, 50/60 hz. minimum load impedance: low impedance output: 4 ohms 70 v output: 40 ohms 100 v output: 80 ohms. low impedance output: 4 ohms. 70 v output: 40 ohms. 100 v output: 80 ohms. operating temperature: 32f to 95f. humidity: 95% rh Storage temperature: -4f to 185f. product dimensions (w x d x h): 17" x 16.3" x 3.5" inches. product weight: 20.2 lbs.. tone control: bass and treble non-detented potentiometers on each channel. bass: 14 db @ 50 hz. treble: 14 db @ 10 khz. input sensitivity: mic input: 5.5 mvrms. line input: 1.3 vrms. rca input (stereo in): 130 mvrms. frequency response: measured at 2.83 vrms into rated load impedance at any output. 4/8 ohms output: 20 hz to 20 khz, 2 db Front-panel display and controls. configurable output routing. includes rack mount kit. specifications: output power per channel: 120 watts into 4 ohms or 8 ohms. insertion loss: 70 v and 100 v outputs: 1 db max.. input channels: 5. output channels: 1. tone control: bass and treble non-detented potentiometers on each channel bass: 14 db @ 50 hz treble: 14 db @ 10 khz. bass: 14 db @ 50 hz. treble: 14 db @ 10 khz

3
9.5
SCORE
JBL VMA1120 Commercial/Restaurant 120W Bluetooth Amplifier+White Wall Controller

JBL VMA1120 Commercial/Restaurant 120W Bluetooth Amplifier+White Wall Controller

by JBL
What We like

Features of CSR-V-WHT: JBL CSR-V White Wall Volume Controller For Select CSM/CSMA/VMA Mixer Amplifiers, Color: White, For CSM-21 & CSM-32 Mixers, Controls Volume, Dual RJ45 Connectors, Uses Cat 5 Cable.

more infoarrow_drop_down

Product Features

  • Package Includes: (1) JBL VMA1120 Commercial/Restaurant 120W 70v Bluetooth Mixer/Amplifier, 5 Inputs, (1) JBL CSR-V White Wall Volume Controller For Select CSM/CSMA/VMA Mixer Amplifiers.
  • Specifications of VMA1120: Output Power Per Channel: 120 Watts into 4 Ohms or 8 Ohms, Insertion Loss: 70 V and 100 V Outputs: 1 dB Max., Input Channels: 5, Output Channels: 1, Tone Control: Bass and Treble non-detented potentiometers on each channel: Bass: 14 dB @ 50 Hz, Treble: 14 dB @ 10 kHz.
  • Features of VMA1120: JBL VMA1120 Commercial/Restaurant 120 Watt Bluetooth Mixer/Amplifier with 5 Inputs, 5-Input Mixer, Supports USB Drives and Bluetooth, 120W, 1-Output Amplifier, Euroblock, RCA, and 1/4" Inputs, Euroblock Outputs, Per-Channel Bass and Treble Controls, Voice-Activated Ducking, Front-Panel Display and Controls, Configurable Output Routing, Includes Rack Mount Kit.

Features of vma1120: JBL vma1120 commercial/restaurant 120 watt bluetooth mixer/amplifier with 5 inputs, 5-input mixer, supports usb drives and bluetooth, 120w, 1-output amplifier, euroblock, rca, and 1/4" inputs, euroblock outputs, per-channel bass and treble controls, voice-activated ducking, front-panel display and controls, configurable output routing, includes rack mount kit. Package includes: (1) JBL vma1120 commercial/restaurant 120w 70v bluetooth mixer/amplifier, 5 inputs, (1) JBL csr-v white wall volume controller for select csm/csma/vma mixer amplifiers. Specifications of vma1120: output power per channel: 120 watts into 4 ohms or 8 ohms, insertion loss: 70 v and 100 v outputs: 1 db max., input channels: 5, output channels: 1, tone control: bass and treble non-detented potentiometers on each channel: bass: 14 db @ 50 hz, treble: 14 db @ 10 khz.

4
9.2
SCORE
JBL VMA1120 Commercial/Restaurant 120W Bluetooth Amplifier+Black Wall Controller

JBL VMA1120 Commercial/Restaurant 120W Bluetooth Amplifier+Black Wall Controller

by JBL
What We like

Package Includes: (1) JBL VMA1120 Commercial/Restaurant 120W 70v Bluetooth Mixer/Amplifier, 5 Inputs. (1) JBL CSR-V Black Wall Volume Controller For Select CSM/CSMA/VMA Mixer Amplifiers. Features: JBL VMA1120 Commercial/Restaurant 120 Watt Bluetooth Mixer/Amplifier with 5 Inputs. 5-Input Mixer. Supports USB Drives and Bluetooth. 120W, 1-Output Amplifier. Euroblock, RCA, and 1/4" Inputs. Euroblock Outputs. Per-Channel Bass and Treble Controls. Voice-Activated Ducking

more infoarrow_drop_down

Product Features

  • Front-Panel Display and Controls. Configurable Output Routing. Includes Rack Mount Kit. Specifications: Output Power Per Channel: 120 Watts into 4 Ohms or 8 Ohms. Insertion Loss: 70 V and 100 V Outputs: 1 dB Max.. Input Channels: 5. Output Channels: 1. Tone Control: Bass and Treble non-detented potentiometers on each channel Bass: 14 dB @ 50 Hz Treble: 14 dB @ 10 kHz. Bass: 14 dB @ 50 Hz. Treble: 14 dB @ 10 kHz
  • Storage Temperature: -4F to 185F. Product Dimensions (W x D x H): 17" x 16.3" x 3.5" inches. Product Weight: 20.2 Lbs.. Tone Control: Bass and Treble non-detented potentiometers on each channel. Bass: 14 dB @ 50 Hz. Treble: 14 dB @ 10 kHz. Input Sensitivity: Mic Input: 5.5 mVrms. Line Input: 1.3 Vrms. RCA Input (Stereo In): 130 mVrms. Frequency Response: Measured at 2.83 Vrms into rated load impedance at any output. 4/8 Ohms Output: 20 Hz to 20 kHz, 2 dB
  • Signal to Noise Ratio: >76 dB. Input Impedance: Mic: 400 Ohms Line: 20k Ohms RCA: 50k Ohms. Mic: 400 Ohms. Line: 20k Ohms. RCA: 50k Ohms. Phantom Power: 27 VDC. Crosstalk: -70 dB. Nominal Input Voltages: Nominal AC Line Voltages: 100, 120, 220, 220 to 240 VAC, 50/60 Hz. Minimum Load Impedance: Low Impedance Output: 4 Ohms 70 V Output: 40 Ohms 100 V Output: 80 Ohms. Low Impedance Output: 4 Ohms. 70 V Output: 40 Ohms. 100 V Output: 80 Ohms. Operating Temperature: 32F to 95F. Humidity: 95% RH
  • Input Sensitivity: Mic Input: 5.5 mVrms Line Input: 1.3 Vrms RCA Input (Stereo In): 130 mVrms. Mic Input: 5.5 mVrms. Line Input: 1.3 Vrms. RCA Input (Stereo In): 130 mVrms. Frequency Response: Measured at 2.83 Vrms into rated load impedance at any output 4/8 Ohms Output: 20 Hz to 20 kHz, 2 dB 70 V/100 V Outputs: 80 Hz to 15 kHz 3 dB. 4/8 Ohms Output: 20 Hz to 20 kHz, 2 dB. 70 V/100 V Outputs: 80 Hz to 15 kHz 3 dB. Total Harmonic Distortion (THD): Power Amp Output:

Front-panel display and controls. configurable output routing. includes rack mount kit. specifications: output power per channel: 120 watts into 4 ohms or 8 ohms. insertion loss: 70 v and 100 v outputs: 1 db max.. input channels: 5. output channels: 1. tone control: bass and treble non-detented potentiometers on each channel bass: 14 db @ 50 hz treble: 14 db @ 10 khz. bass: 14 db @ 50 hz. treble: 14 db @ 10 khz Storage temperature: -4f to 185f. product dimensions (w x d x h): 17" x 16.3" x 3.5" inches. product weight: 20.2 lbs.. tone control: bass and treble non-detented potentiometers on each channel. bass: 14 db @ 50 hz. treble: 14 db @ 10 khz. input sensitivity: mic input: 5.5 mvrms. line input: 1.3 vrms. rca input (stereo in): 130 mvrms. frequency response: measured at 2.83 vrms into rated load impedance at any output. 4/8 ohms output: 20 hz to 20 khz, 2 db Signal to noise ratio: >76 db. input impedance: mic: 400 ohms line: 20k ohms rca: 50k ohms. mic: 400 ohms. line: 20k ohms. rca: 50k ohms. phantom power: 27 vdc. crosstalk: -70 db. nominal input voltages: nominal ac line voltages: 100, 120, 220, 220 to 240 vac, 50/60 hz. minimum load impedance: low impedance output: 4 ohms 70 v output: 40 ohms 100 v output: 80 ohms. low impedance output: 4 ohms. 70 v output: 40 ohms. 100 v output: 80 ohms. operating temperature: 32f to 95f. humidity: 95% rh Input sensitivity: mic input: 5.5 mvrms line input: 1.3 vrms rca input (stereo in): 130 mvrms. mic input: 5.5 mvrms. line input: 1.3 vrms. rca input (stereo in): 130 mvrms. frequency response: measured at 2.83 vrms into rated load impedance at any output 4/8 ohms output: 20 hz to 20 khz, 2 db 70 v/100 v outputs: 80 hz to 15 khz 3 db. 4/8 ohms output: 20 hz to 20 khz, 2 db. 70 v/100 v outputs: 80 hz to 15 khz 3 db. total harmonic distortion (thd): power amp output:

5
8.9
SCORE
JBL VMA1120 120W 70v Amplifier+(4) JBL Black 8

JBL VMA1120 120W 70v Amplifier+(4) JBL Black 8" Ceiling Speakers For Restaurant

by JBL
What We like

Package Includes: (1) JBL VMA1120 Commercial/Restaurant 120W 70v Bluetooth Mixer/Amplifier, 5 Inputs. (2) Pairs of JBL Control 18C/T-BK 8" 70v Commercial Black Ceiling Speakers For Restaurant. Features: JBL VMA1120 Commercial/Restaurant 120 Watt Bluetooth Mixer/Amplifier with 5 Inputs. 5-Input Mixer. Supports USB Drives and Bluetooth. 120W, 1-Output Amplifier. Euroblock, RCA, and 1/4" Inputs. Euroblock Outputs. Per-Channel Bass and Treble Controls. Voice-Activated Ducking

more infoarrow_drop_down

Product Features

  • Input Sensitivity: Mic Input: 5.5 mVrms Line Input: 1.3 Vrms RCA Input (Stereo In): 130 mVrms. Mic Input: 5.5 mVrms. Line Input: 1.3 Vrms. RCA Input (Stereo In): 130 mVrms. Frequency Response: Measured at 2.83 Vrms into rated load impedance at any output 4/8 Ohms Output: 20 Hz to 20 kHz, 2 dB 70 V/100 V Outputs: 80 Hz to 15 kHz 3 dB. 4/8 Ohms Output: 20 Hz to 20 kHz, 2 dB. 70 V/100 V Outputs: 80 Hz to 15 kHz 3 dB. Total Harmonic Distortion (THD): Power Amp Output:
  • Storage Temperature: -4F to 185F. Product Dimensions (W x D x H): 17" x 16.3" x 3.5" inches. Product Weight: 20.2 Lbs.. Tone Control: Bass and Treble non-detented potentiometers on each channel. Bass: 14 dB @ 50 Hz. Treble: 14 dB @ 10 kHz. Input Sensitivity: Mic Input: 5.5 mVrms. Line Input: 1.3 Vrms. RCA Input (Stereo In): 130 mVrms. Frequency Response: Measured at 2.83 Vrms into rated load impedance at any output. 4/8 Ohms Output: 20 Hz to 20 kHz, 2 dB
  • Front-Panel Display and Controls. Configurable Output Routing. Includes Rack Mount Kit. Specifications: Output Power Per Channel: 120 Watts into 4 Ohms or 8 Ohms. Insertion Loss: 70 V and 100 V Outputs: 1 dB Max.. Input Channels: 5. Output Channels: 1. Tone Control: Bass and Treble non-detented potentiometers on each channel Bass: 14 dB @ 50 Hz Treble: 14 dB @ 10 kHz. Bass: 14 dB @ 50 Hz. Treble: 14 dB @ 10 kHz
  • Signal to Noise Ratio: >76 dB. Input Impedance: Mic: 400 Ohms Line: 20k Ohms RCA: 50k Ohms. Mic: 400 Ohms. Line: 20k Ohms. RCA: 50k Ohms. Phantom Power: 27 VDC. Crosstalk: -70 dB. Nominal Input Voltages: Nominal AC Line Voltages: 100, 120, 220, 220 to 240 VAC, 50/60 Hz. Minimum Load Impedance: Low Impedance Output: 4 Ohms 70 V Output: 40 Ohms 100 V Output: 80 Ohms. Low Impedance Output: 4 Ohms. 70 V Output: 40 Ohms. 100 V Output: 80 Ohms. Operating Temperature: 32F to 95F. Humidity: 95% RH

Input sensitivity: mic input: 5.5 mvrms line input: 1.3 vrms rca input (stereo in): 130 mvrms. mic input: 5.5 mvrms. line input: 1.3 vrms. rca input (stereo in): 130 mvrms. frequency response: measured at 2.83 vrms into rated load impedance at any output 4/8 ohms output: 20 hz to 20 khz, 2 db 70 v/100 v outputs: 80 hz to 15 khz 3 db. 4/8 ohms output: 20 hz to 20 khz, 2 db. 70 v/100 v outputs: 80 hz to 15 khz 3 db. total harmonic distortion (thd): power amp output: Signal to noise ratio: >76 db. input impedance: mic: 400 ohms line: 20k ohms rca: 50k ohms. mic: 400 ohms. line: 20k ohms. rca: 50k ohms. phantom power: 27 vdc. crosstalk: -70 db. nominal input voltages: nominal ac line voltages: 100, 120, 220, 220 to 240 vac, 50/60 hz. minimum load impedance: low impedance output: 4 ohms 70 v output: 40 ohms 100 v output: 80 ohms. low impedance output: 4 ohms. 70 v output: 40 ohms. 100 v output: 80 ohms. operating temperature: 32f to 95f. humidity: 95% rh Front-panel display and controls. configurable output routing. includes rack mount kit. specifications: output power per channel: 120 watts into 4 ohms or 8 ohms. insertion loss: 70 v and 100 v outputs: 1 db max.. input channels: 5. output channels: 1. tone control: bass and treble non-detented potentiometers on each channel bass: 14 db @ 50 hz treble: 14 db @ 10 khz. bass: 14 db @ 50 hz. treble: 14 db @ 10 khz Storage temperature: -4f to 185f. product dimensions (w x d x h): 17" x 16.3" x 3.5" inches. product weight: 20.2 lbs.. tone control: bass and treble non-detented potentiometers on each channel. bass: 14 db @ 50 hz. treble: 14 db @ 10 khz. input sensitivity: mic input: 5.5 mvrms. line input: 1.3 vrms. rca input (stereo in): 130 mvrms. frequency response: measured at 2.83 vrms into rated load impedance at any output. 4/8 ohms output: 20 hz to 20 khz, 2 db

6
8.8
SCORE
JBL VMA1120 120W 70v Amplifier+(4) JBL White 8

JBL VMA1120 120W 70v Amplifier+(4) JBL White 8" Ceiling Speakers For Restaurant

by JBL
What We like

Features of CONTROL 18C/T: Pair JBL CONTROL 18C/T 8" 60w 70v In-Ceiling Speakers For Restaurant/Bar/Cafe, 200 mm (8.0 in) high output driver with polypropylene cone and butyl rubber surround, 25 mm (1.0 in) soft-dome liquid-cooled tweeter, Blind-mount backcan for quick and easy installation, Dual conduit/cable clamps, Combined 70V/100V and low impedance direct operation, 90 Watts at 8 nominal setting, 60W multi-tap at 70V/100V, 58 Hz 20 kHz bandwidth with 90 coverage.

more infoarrow_drop_down

Product Features

  • Specifications of CONTROL 18C/T: Frequency Range (-10 dB)1 58 Hz 20 kHz, Frequency Response (3 dB)1 80 Hz 16 kHz, Power Capacity (at low-Z) 2 180 Watts Continuous Program Power, Maxium Input Voltage 31.8 V RMS (2hrs), 63.6 V peak, Nominal Sensitivity3 92 dB, Nominal Coverage Angle3 90 conical coverage, Directivity Factor (Q) 3 6.0, Directivity Index (DI) 3 7.8 dB, Rated Maximum SPL 112 dB @ 1 m (3.3 ft) average, 118 dB peak, Nominal Impedance 8 ohms (in direct/bypass 8 setting).
  • Features of VMA1120: JBL VMA1120 Commercial/Restaurant 120 Watt Bluetooth Mixer/Amplifier with 5 Inputs, 5-Input Mixer, Supports USB Drives and Bluetooth, 120W, 1-Output Amplifier, Euroblock, RCA, and 1/4" Inputs, Euroblock Outputs, Per-Channel Bass and Treble Controls, Voice-Activated Ducking, Front-Panel Display and Controls, Configurable Output Routing, Includes Rack Mount Kit.
  • Package Includes: (1) JBL VMA1120 Commercial/Restaurant 120W 70v Bluetooth Mixer/Amplifier, 5 Inputs, (2) Pair JBL CONTROL 18C/T 8" 60w 70v In-Ceiling Speakers For Restaurant/Bar/Cafe.
  • Specifications of VMA1120: Output Power Per Channel: 120 W into 4 Ohms or 8 Ohms, Insertion Loss: 70 V and 100 V Outputs: 1 dB Max, Input Channels: 5, Output Channels: 1, Tone Control: Bass and Treble non-detented potentiometers on each channel, Bass: 14 dB @ 50 Hz, Treble: 14 dB @ 10 kHz, Input Sensitivity: Mic Input: 5.5 mVrms, Line Input: 1.3 Vrms, RCA Input: 130 mVrms, Frequency Response: Measured at 2.83 Vrms into rated load impedance at any output: 4/8 Ohms Output: 20 Hz to 20 kHz, 2 dB

Features of vma1120: JBL vma1120 commercial/restaurant 120 watt bluetooth mixer/amplifier with 5 inputs, 5-input mixer, supports usb drives and bluetooth, 120w, 1-output amplifier, euroblock, rca, and 1/4" inputs, euroblock outputs, per-channel bass and treble controls, voice-activated ducking, front-panel display and controls, configurable output routing, includes rack mount kit. Specifications of vma1120: output power per channel: 120 w into 4 ohms or 8 ohms, insertion loss: 70 v and 100 v outputs: 1 db max, input channels: 5, output channels: 1, tone control: bass and treble non-detented potentiometers on each channel, bass: 14 db @ 50 hz, treble: 14 db @ 10 khz, input sensitivity: mic input: 5.5 mvrms, line input: 1.3 vrms, rca input: 130 mvrms, frequency response: measured at 2.83 vrms into rated load impedance at any output: 4/8 ohms output: 20 hz to 20 khz, 2 db Package includes: (1) JBL vma1120 commercial/restaurant 120w 70v bluetooth mixer/amplifier, 5 inputs, (2) pair JBL control 18c/t 8" 60w 70v in-ceiling speakers for restaurant/bar/cafe. Specifications of control 18c/t: frequency range (-10 db)1 58 hz 20 khz, frequency response (3 db)1 80 hz 16 khz, power capacity (at low-z) 2 180 watts continuous program power, maxium input voltage 31.8 v rms (2hrs), 63.6 v peak, nominal sensitivity3 92 db, nominal coverage angle3 90 conical coverage, directivity factor (q) 3 6.0, directivity index (di) 3 7.8 db, rated maximum spl 112 db @ 1 m (3.3 ft) average, 118 db peak, nominal impedance 8 ohms (in direct/bypass 8 setting).

7
8.7
SCORE
6-Zone Amplifier+2 JBL Pendant+6 Slim White Wall Speakers 4 Restaurant/Bar/Cafe

6-Zone Amplifier+2 JBL Pendant+6 Slim White Wall Speakers 4 Restaurant/Bar/Cafe

by JBL
What We like

A Weighted Signal to Noise (referenced to full 4 ohm power) -89.2dBA. Frequency response: 49Hz to 14.9 Khz. Frequency Response VS THD+M (worst case across normal bandwidth 1W @ 8 Ohms: 0.89%. Weight: 22.7lbs. Dimensions: 19 x 16 x 4 inches. 70V Power Options: 8w. 4w. Features: Pair of Rockville RockSlim 70W 70 Volt Commercial Speakers in White. Built in 70 Volt transformer with Inputs for 8 watts or 4 watts. Easy wall mount brackets

more infoarrow_drop_down

Product Features

  • Built in cooling system keeps component cool at all times. Built in cooling system keeps component cool at all times. Inputs and Outputs: (2) Sets RCA AUX inputs. (3) Mic inputs. RCA Line output. 100V speaker red positive speaker output terminal. 70V speaker red positive speaker output terminal. 8 Ohm red positive speaker output terminal. Shared negative speaker output terminal. Specifications: Power Requirements: 120V / 50-60Hz. A Weighted Signal to Noise (@ 1W) -68.1dBA
  • USB input to play audio stored on a thumb drive (32gb max). SD card slot to play music stored on an SD Card (32gb max). Separate volume control for MIC1, MIC2, MIC3, MP3, LINE1, LINE 2, and MP3. Echo control for the mic inputs with speed and repeat adjustments. Built in clipping limiter to protect the amp and speakers. BASS and Treble control. Chime button for making announcements. Top quality aluminum panel with industrial grade knobs. 5 segments signal level indication
  • Rockville RCS180-6350 Watt commercial/restaurant amplifier 19" rack mountable (removable rack brackets) digital hybrid amplifier/receiver. Capable of 70 volt, 100 volt, 8ohm, and 4 ohm. 70/100 volt RMS Power: 184 Watts. 4-16 ohm binding post speaker output. 6-Zones of speaker outputs - each zone has a separate volume control. 70 and 100 volt binding post outputs for single zone playback of all 180 watts. Built in Bluetooth audio streaming. FM radio tuner

Usb input to play audio stored on a thumb drive (32gb max). sd card slot to play music stored on an sd card (32gb max). separate volume control for mic1, mic2, mic3, mp3, line1, line 2, and mp3. echo control for the mic inputs with speed and repeat adjustments. built in clipping limiter to protect the amp and speakers. bass and treble control. chime button for making announcements. top quality aluminum panel with industrial grade knobs. 5 segments signal level indication Built in cooling system keeps component cool at all times. built in cooling system keeps component cool at all times. inputs and outputs: (2) sets rca aux inputs. (3) mic inputs. rca line output. 100v speaker red positive speaker output terminal. 70v speaker red positive speaker output terminal. 8 ohm red positive speaker output terminal. shared negative speaker output terminal. specifications: power requirements: 120v / 50-60hz. a weighted signal to noise (@ 1w) -68.1dba Rockville rcs180-6350 watt commercial/restaurant amplifier 19" rack mountable (removable rack brackets) digital hybrid amplifier/receiver. capable of 70 volt, 100 volt, 8ohm, and 4 ohm. 70/100 volt rms power: 184 watts. 4-16 ohm binding post speaker output. 6-zones of speaker outputs - each zone has a separate volume control. 70 and 100 volt binding post outputs for single zone playback of all 180 watts. built in bluetooth audio streaming. fm radio tuner

8
8.3
SCORE
JBL Commercial Amplifier+(12) 3.5

JBL Commercial Amplifier+(12) 3.5" Black Cube Speakers for Restaurant/Bar/Cafe

by JBL
What We like

Package Includes: (1) JBL VMA1120 Commercial/Restaurant 120W 70v Bluetooth Mixer/Amplifier, 5 Inputs. (6) Cube by Rockville Pair of 3.5" Black Commercial 70v Swivel Wall Mount Speakers. Features of VMA1120: JBL VMA1120 Commercial/Restaurant 120 Watt Bluetooth Mixer/Amplifier with 5 Inputs. 5-Input Mixer. Supports USB Drives and Bluetooth. 120W, 1-Output Amplifier. Euroblock, RCA, and 1/4" Inputs. Euroblock Outputs. Per-Channel Bass and Treble Controls. Voice-Activated Ducking

more infoarrow_drop_down

Product Features

  • Front-Panel Display and Controls. Configurable Output Routing. Includes Rack Mount Kit. Specifications: Output Power Per Channel: 120 Watts into 4 Ohms or 8 Ohms. Insertion Loss: 70 V and 100 V Outputs: 1 dB Max.. Input Channels: 5. Output Channels: 1. Tone Control: Bass and Treble non-detented potentiometers on each channel Bass: 14 dB @ 50 Hz Treble: 14 dB @ 10 kHz. Bass: 14 dB @ 50 Hz. Treble: 14 dB @ 10 kHz
  • Input Sensitivity: Mic Input: 5.5 mVrms Line Input: 1.3 Vrms RCA Input (Stereo In): 130 mVrms. Mic Input: 5.5 mVrms. Line Input: 1.3 Vrms. RCA Input (Stereo In): 130 mVrms. Frequency Response: Measured at 2.83 Vrms into rated load impedance at any output 4/8 Ohms Output: 20 Hz to 20 kHz, 2 dB 70 V/100 V Outputs: 80 Hz to 15 kHz 3 dB. 4/8 Ohms Output: 20 Hz to 20 kHz, 2 dB. 70 V/100 V Outputs: 80 Hz to 15 kHz 3 dB. Total Harmonic Distortion (THD): Power Amp Output:
  • Signal to Noise Ratio: >76 dB. Input Impedance: Mic: 400 Ohms Line: 20k Ohms RCA: 50k Ohms. Mic: 400 Ohms. Line: 20k Ohms. RCA: 50k Ohms. Phantom Power: 27 VDC. Crosstalk: -70 dB. Nominal Input Voltages: Nominal AC Line Voltages: 100, 120, 220, 220 to 240 VAC, 50/60 Hz. Minimum Load Impedance: Low Impedance Output: 4 Ohms 70 V Output: 40 Ohms 100 V Output: 80 Ohms. Low Impedance Output: 4 Ohms. 70 V Output: 40 Ohms. 100 V Output: 80 Ohms. Operating Temperature: 32F to 95F. Humidity: 95% RH
  • Storage Temperature: -4F to 185F. Product Dimensions (W x D x H): 17" x 16.3" x 3.5" inches. Product Weight: 20.2 Lbs.. Tone Control: Bass and Treble non-detented potentiometers on each channel. Bass: 14 dB @ 50 Hz. Treble: 14 dB @ 10 kHz. Input Sensitivity: Mic Input: 5.5 mVrms. Line Input: 1.3 Vrms. RCA Input (Stereo In): 130 mVrms. Frequency Response: Measured at 2.83 Vrms into rated load impedance at any output. 4/8 Ohms Output: 20 Hz to 20 kHz, 2 dB

Signal to noise ratio: >76 db. input impedance: mic: 400 ohms line: 20k ohms rca: 50k ohms. mic: 400 ohms. line: 20k ohms. rca: 50k ohms. phantom power: 27 vdc. crosstalk: -70 db. nominal input voltages: nominal ac line voltages: 100, 120, 220, 220 to 240 vac, 50/60 hz. minimum load impedance: low impedance output: 4 ohms 70 v output: 40 ohms 100 v output: 80 ohms. low impedance output: 4 ohms. 70 v output: 40 ohms. 100 v output: 80 ohms. operating temperature: 32f to 95f. humidity: 95% rh Storage temperature: -4f to 185f. product dimensions (w x d x h): 17" x 16.3" x 3.5" inches. product weight: 20.2 lbs.. tone control: bass and treble non-detented potentiometers on each channel. bass: 14 db @ 50 hz. treble: 14 db @ 10 khz. input sensitivity: mic input: 5.5 mvrms. line input: 1.3 vrms. rca input (stereo in): 130 mvrms. frequency response: measured at 2.83 vrms into rated load impedance at any output. 4/8 ohms output: 20 hz to 20 khz, 2 db Front-panel display and controls. configurable output routing. includes rack mount kit. specifications: output power per channel: 120 watts into 4 ohms or 8 ohms. insertion loss: 70 v and 100 v outputs: 1 db max.. input channels: 5. output channels: 1. tone control: bass and treble non-detented potentiometers on each channel bass: 14 db @ 50 hz treble: 14 db @ 10 khz. bass: 14 db @ 50 hz. treble: 14 db @ 10 khz Input sensitivity: mic input: 5.5 mvrms line input: 1.3 vrms rca input (stereo in): 130 mvrms. mic input: 5.5 mvrms. line input: 1.3 vrms. rca input (stereo in): 130 mvrms. frequency response: measured at 2.83 vrms into rated load impedance at any output 4/8 ohms output: 20 hz to 20 khz, 2 db 70 v/100 v outputs: 80 hz to 15 khz 3 db. 4/8 ohms output: 20 hz to 20 khz, 2 db. 70 v/100 v outputs: 80 hz to 15 khz 3 db. total harmonic distortion (thd): power amp output:

9
8.3
SCORE
JBL VMA160 Commercial/Restaurant 120W Bluetooth Amplifier+White Wall Controller

JBL VMA160 Commercial/Restaurant 120W Bluetooth Amplifier+White Wall Controller

by JBL
What We like

Package Includes: (1) JBL VMA160 60-Watt 70 Volt 70V Mixer/Amplifier with Bluetooth 5 Channel Inputs. (1) JBL CSR-V White Wall Volume Controller For Select CSM/CSMA/VMA Mixer Amplifiers. Features: JBL VMA160 60 Watt 70V Mixer/Amplifier with Bluetooth and 5 Channel Inputs

more infoarrow_drop_down

Product Features

  • Input Sensitivity: Mic Input: 5.5mVRMS Line Input: 1.3VRMS RCA Input (stereo in): 130mVRMS. Independent bass and treble controls for each output channel. Paging Chime, and Priority Muting. Rack mounting hardware included. Product Dimensions (W x D x H): 17" x 16.3" x 3.5" inches
  • Max Output Power: 60 Watts. Frequency Response: 20 Hz - 20 kHz. THD (Total Harmonic Distortion): 76 dB. Input Impedance: Mic: 400 Ohms Line: 20 kOhms (balanced) RCA: 50 kOhms. Phantom Power: 27VDC. Crosstalk: -70 dB
  • Product Weight: 19.4 Lbs.. JBL CSR-V White Wall Volume Controller For Select CSM/CSMA/VMA Mixer Amplifiers. Color: White. For CSM-21 & CSM-32 Mixers. Controls Volume. Dual RJ45 Connectors. Uses Cat 5 Cable
  • Nominal AC Line Voltages: 100V, 120V, 220V, 220-240V, 50/60 Hz. Minimum Load Impedance: 4 Ohms, 80 Ohms,160 Ohms. Insertion Loss: 1 dB Maximum. Number of Inputs: 5. Number of Outputs: 1. Tone Control: Bass +/-14dB @ 50Hz; Treble +/-14dB @10kHz

Nominal ac line voltages: 100v, 120v, 220v, 220-240v, 50/60 hz. minimum load impedance: 4 ohms, 80 ohms,160 ohms. insertion loss: 1 db maximum. number of inputs: 5. number of outputs: 1. tone control: bass +/-14db @ 50hz; treble +/-14db @10khz Max output power: 60 watts. frequency response: 20 hz - 20 khz. thd (total harmonic distortion): 76 db. input impedance: mic: 400 ohms line: 20 kohms (balanced) rca: 50 kohms. phantom power: 27vdc. crosstalk: -70 db Product weight: 19.4 lbs.. JBL csr-v white wall volume controller for select csm/csma/vma mixer amplifiers. color: white. for csm-21 & csm-32 mixers. controls volume. dual rj45 connectors. uses cat 5 cable Input sensitivity: mic input: 5.5mvrms line input: 1.3vrms rca input (stereo in): 130mvrms. independent bass and treble controls for each output channel. paging chime, and priority muting. rack mounting hardware included. product dimensions (w x d x h): 17" x 16.3" x 3.5" inches

10
8.3
SCORE
JBL Stadium 4 100W x 4 Car Amplifier

JBL Stadium 4 100W x 4 Car Amplifier

by JBL
What We like

preamp and speaker-level inputs

more infoarrow_drop_down

Product Features

  • high- and low-pass filters
  • 240 watts RMS x 2 bridged

240 watts rms x 2 bridged High- and low-pass filters

expand_less

I Agree
We use cookies to enhance and personalise your experience with us by collecting information about the pages you visit and actions taken on the site. More details