10 Best Epoxy Adhesives
for June 2021

Recommendations are independently chosen by MOOZ’s editors. Purchases you make through our links may earn us a commission.

1
9.9
SCORE
PC-Products PC-11 Epoxy Adhesive Paste, Two-Part Marine Grade, 1lb in Two Cans, Off White 160114

PC Products PC-Products PC-11 Epoxy Adhesive Paste

Two-Part Marine Grade, 1lb in Two Cans, Off White 160114

by Protective Coating Co.
What We like

Resists mild acids, caustics, detergents, gasoline, fuel oil, and fresh and salt water

more infoarrow_drop_down

Product Features

  • Bonds many materials, including fiberglass, concrete, many metals, glass, ceramic, and rubber
  • Two-part marine epoxy adhesive paste bonds materials in dry, wet, and underwater environments
  • High-tack paste can be used in vertical and overhead applications
  • Can be used in indoor and outdoor applications, with a temperature range of 35 to 115 degrees F and a service temperature range -20 to +200 degrees F

Can be used in indoor and outdoor applications, with a temperature range of 35 to 115 degrees f and a service temperature range -20 to +200 degrees f Bonds many materials, including fiberglass, concrete, many metals, glass, ceramic, and rubber Two-part marine epoxy adhesive paste bonds materials in dry, wet, and underwater environments High-tack paste can be used in vertical and overhead applications

2
9.7
SCORE
PC Products PC-Super Epoxy Adhesive Paste, Two-Part 1 oz Double Syringe, Translucent 16619

PC Products PC-Super Epoxy Adhesive Paste

Two-Part 1 oz Double Syringe, Translucent 16619

by Protective Coating Co.
What We like

Provides work time of 15 minutes, cure time for service of 3 to 4 hours, and full cure time of 3 to 7 days

more infoarrow_drop_down

Product Features

  • Continuous service temperature range from -20 to +200 degrees F
  • Cures translucent to blend in with bonded material
  • Can be drilled, sanded, sawed, and painted after full cure
  • Epoxy adhesive paste bonds, seals, and fills a range of materials, including wood, metal, glass, brick, concrete, and fiberglass

Epoxy adhesive paste bonds, seals, and fills a range of materials, including wood, metal, glass, brick, concrete, and fiberglass Cures translucent to blend in with bonded material Continuous service temperature range from -20 to +200 degrees f Can be drilled, sanded, sawed, and painted after full cure

3
9.4
SCORE
Epoxy Adhesive C-Tough by CECCORP is a 8.5 oz Two Part high Performance Extremely Tough/Flexible epoxy Glue Provides Superb Adhesion to substrates Such as Metals,Glass,Fiberglass,Masonry,Wood,Stones

Epoxy Adhesive C-Tough by CECCORP is a 8.5 oz Two Part high Performance Extremely Tough/Flexible epoxy Glue Provides Superb Adhesion to substrates Such as Metals

Glass, Fiberglass, Masonry, Wood, Stones

by Chemical Engineering Canada Corporation
What We like

Flexible and tough structural bonding

more infoarrow_drop_down

Product Features

  • knife making and repair
  • Boat and canoe building
  • Golf club repair
  • Assembling metal, plastic and wood parts

Knife making and repair Assembling metal, plastic and wood parts Boat and canoe building Golf club repair

4
9.3
SCORE
Two Part 5 Minute Epoxy Adhesive C-Poxy 5 by CECCORP is a 8.5 oz General Purpose Structural-unfilled-Fast Setting epoxy. Recommended for bonding Metals, Ceramics, Stone, Glass, Concrete, Wood, Fiber

Two Part 5 Minute Epoxy Adhesive C-Poxy 5 by CECCORP is a 8.5 oz General Purpose Structural-unfilled-Fast Setting epoxy. Recommended for bonding Metals

Ceramics, Stone, Glass, Concrete, Wood, Fiber

by Chemical Engineering Canada Corporation
What We like

Open the seal of each bottle (linear under cap) and cut the tip of the bottle to allow each part to flow freely.

more infoarrow_drop_down

Product Features

  • Shelf life: 2 years in unopened packaging at +5C / +27C.
  • Safety and handling: Consult Material Safety Data Sheet (MSDS) before use.
  • Directions for use: Part A and B need to be mixed thoroughly in the correct volume ratio for 1 minute before use. Gel time of the mixed product is 4-6 minutes at room temperature. Parts requiring bonding should be assembled and kept close without any stress. Assembling is continued until full curing takes place. Excess of the product can be cleaned with Acetone or any solvent-based cleaner compatible with the substrates to bond.
  • Storage: Product must be kept in a cool and dry room at 10C to 25C.

Storage: product must be kept in a cool and dry room at 10c to 25c. Directions for use: part a and b need to be mixed thoroughly in the correct volume ratio for 1 minute before use. gel time of the mixed product is 4-6 minutes at room temperature. parts requiring bonding should be assembled and kept close without any stress. assembling is continued until full curing takes place. excess of the product can be cleaned with acetone or any solvent-based cleaner compatible with the substrates to bond. Safety and handling: consult material safety data sheet (msds) before use. Shelf life: 2 years in unopened packaging at +5c / +27c.

5
8.9
SCORE
PC Products PC-Super Epoxy Adhesive Paste, Two-Part 50ml Cartridge, Translucent 502

PC Products PC-Super Epoxy Adhesive Paste

Two-Part 50ml Cartridge, Translucent 502

by Protective Coating Co.
What We like

Provides work time of 15 minutes, cure time for service of 3 to 4 hours, and full cure time of 3 to 7 days

more infoarrow_drop_down

Product Features

  • Can be drilled, sanded, sawed, and painted after full cure
  • Cures translucent to blend in with bonded material
  • Continuous service temperature range from -20 to +200 degrees F
  • Epoxy adhesive paste bonds, seals, and fills a range of materials, including wood, metal, glass, brick, concrete, and fiberglass

Continuous service temperature range from -20 to +200 degrees f Epoxy adhesive paste bonds, seals, and fills a range of materials, including wood, metal, glass, brick, concrete, and fiberglass Cures translucent to blend in with bonded material Can be drilled, sanded, sawed, and painted after full cure

6
8.7
SCORE
C-POXY 30 by CECCORP is a fast/mid setting 30 minutes epoxy adhesive/glue. Recommended for bonding metal, ceramics, stone, glass, concrete, wood, fiberglass and many plastics. Product Name

C-POXY 30 by CECCORP is a fast/mid setting 30 minutes epoxy adhesive/glue. Recommended for bonding metal

ceramics, stone, glass, concrete, wood, fiberglass and many plastics. Product Name

by Chemical Engineering Canada Corporation
What We like

Open the seal of each bottle (linear under cap) and cut the tip of the bottle to allow each part to flow freely. Do not mix a large batch. Mixing a large batch can create heat (exothermic reaction) and reduce cure time.

more infoarrow_drop_down

Product Features

  • Shelf life: Minimum two (2) years in unopened packaging at +5C / +27C.
  • Perfect for countertop repairs and musical instrument manufacturing and repairs.
  • Works better than other epoxies for bonding brass, bronze, and glass.
  • Direction of use: Part A and B need to be mixed thoroughly in the correct volume ratio for minimum 1 minute before use. Gel time of the mixed product is 20-40 minutes at room temperature. Parts requiring bonding should be assembled and kept close without any stress. Assembling is continued until full curing takes place. Excess of the product can be cleaned with Acetone or any solvent-based cleaner compatible with the substrates to bond.

Shelf life: minimum two (2) years in unopened packaging at +5c / +27c. Works better than other epoxies for bonding brass, bronze, and glass. Direction of use: part a and b need to be mixed thoroughly in the correct volume ratio for minimum 1 minute before use. gel time of the mixed product is 20-40 minutes at room temperature. parts requiring bonding should be assembled and kept close without any stress. assembling is continued until full curing takes place. excess of the product can be cleaned with acetone or any solvent-based cleaner compatible with the substrates to bond. Perfect for countertop repairs and musical instrument manufacturing and repairs.

7
8.4
SCORE
J-B Weld 50133 Plastic Bonder Structural Adhesive Syringe - Tan - 25 ml

J-B Weld 50133 Plastic Bonder Structural Adhesive Syringe

Tan, 25 ml

by J-B Weld
What We like

J-B WELD PLASTICBONDER (Tan): A quick setting and multipurpose two part urethane adhesive & gap filling system that provides a strong and lasting bond to many plastic surfaces. J-B Weld PlasticBonder is great for DIY plastic repairs, filling dents, bumper repairs and more! J-B Weld PlasticBonder now comes in a syringe allowing for an easy 1:1 mix ratio. The unique syringe has a re-sealable cap that prevents drying out and leaking, allowing for multiple uses!

more infoarrow_drop_down

Product Features

  • CURE AND SET TIME: After mixing the two part formula with the included mixing tray and stir stick, PlasticBonder takes 15 minutes to set and 30 hours to cure. J-B Weld PlasticBonder set and cure color is tan
  • SURFACE APPLICATIONS: Thermoset & Carbon Fiber Composites, Thermoplastics and Coated Metals, Plastic & PVC, Concrete, Ceramic & Tile, Fiberglass, and Aluminum.
  • STRENGTH: J-B Weld PlasticBonder has tensile strength of 3770 PSI.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the Worlds Strongest Bond.

Surface applications: thermoset & carbon fiber composites, thermoplastics and coated metals, plastic & pvc, concrete, ceramic & tile, fiberglass, and aluminum. Cure and set time: after mixing the two part formula with the included mixing tray and stir stick, plasticbonder takes 15 minutes to set and 30 hours to cure. J-B Weld plasticbonder set and cure color is tan Do it yourself: big or small, you can diy it with J-B Weld. our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the worlds strongest bond. Strength: J-B Weld plasticbonder has tensile strength of 3770 psi.

8
8.4
SCORE
Devcon Epoxy, 2 Ton Epoxy, 4.25 Ounce each, 2 Bottles

EURO TOOL Devcon Epoxy

2 Ton Epoxy, 4.25 Ounce each, 2 Bottles

by Eurotool
What We like

Ideal for joining wood, metal, concrete, glass, ceramics, china and more

more infoarrow_drop_down

Product Features

  • Sets in 30 minutes with strength up to 2,500 pounds per square inch
  • Dries clear
  • water resistant
  • Includes 2 bottles; 4-1/2 ounce bottles

Water resistant Dries clear Includes 2 bottles; 4-1/2 ounce bottles Sets in 30 minutes with strength up to 2,500 pounds per square inch

9
8.4
SCORE
Loctite 1919324 Marine Epoxy 0.85-Fluid Ounce Syringe (1405604), 1 Pack, White

Loctite 1919324 Marine Epoxy 0.85-Fluid Ounce Syringe (1405604)

1 Pack, White

by Loctite
What We like

Water and solvent resistant, highly durable

more infoarrow_drop_down

Product Features

  • Apply and cure under water, eliminates the need to drain out water before fixing
  • Convenient syringe dispenses equal amounts of each component every time
  • Machinable, won't crack when drilled
  • Does not shrink, one-time application

Apply and cure under water, eliminates the need to drain out water before fixing Convenient syringe dispenses equal amounts of each component every time Machinable, won't crack when drilled Does not shrink, one-time application

10
7.4
SCORE
Granite, Marble & Stone Adhesive - Clear SCA

HIMG Surface Repair Granite, Marble & Stone Adhesive

Clear SCA

by HIMG Surface Repair
What We like

Extra Strong Bond

more infoarrow_drop_down

Product Features

  • Non-Toxic, Odorless
  • Alternative to Epoxy - Will not yellow over time
  • Cures Hard in Minutes

Cures hard in minutes Alternative to epoxy - will not yellow over time Non-toxic, odorless

expand_less

I Agree
We use cookies to enhance and personalise your experience with us by collecting information about the pages you visit and actions taken on the site. More details