1. MOOZ Home >>
  2. All Categories >>
  3. Tools & Home Improvement >>
  4. Pumps & Plumbing Equipment >>
  5. 10 Best Effluent Pumps

10 Best Effluent Pumps
for July 2022

Last Updated On

Recommendations are independently chosen by MOOZ’s editors. Purchases you make through our links may earn us a commission.

1
9.8
SCORE
Zoeller 267-0002 Model N267 Waste-Mate Non-Automatic Cast Iron Single Phase Submersible Sewage/Effluent Pump

Zoeller 267-0002 Model N267 Waste-Mate Non-Automatic Cast Iron Single Phase Submersible Sewage/Effluent Pump

by Zoeller
What We like

Completely submersible.Minimum recommended basin size (small load applications): simplex 18 x 30 (45.7 x 76.2 cm), duplex 30 x 36 (76.2 x 91.4 cm)

View Deal at Amazon
more infoarrow_drop_down

Product Features

  • Non-automatic model, 15' cord
  • 1/2 HP submersible sewage pump
  • Pumps 128-Gallon per minute with 5-Foot head
  • 2" discharge, passes 2" spherical solids
  • 100% factory tested

Non-automatic model, 15' cord Includes a 15-foot 3-wire neoprene cord Shut-off head: 21.5-feet 100% factory tested 2" discharge, passes 2" spherical solids Performance: 115 gpm at 5' tdh, shut-off: 20.5' tdh Passes 2-inch spherical solids 1/2 hp submersible sewage pump Pumps 128-gallon per minute with 5-foot head

2
9.5
SCORE
Zoeller 53-0016 115-Volt 0.3 Horse Power Model M53 Mighty-Mate Automatic Cast Iron Single Phase Submersible Sump/Effluent Pump

Zoeller 53-0016 115-Volt 0.3 Horse Power Model M53 Mighty-Mate Automatic Cast Iron Single Phase Submersible Sump/Effluent Pump

by Zoeller
What We like

Includes a 25-Foot 3-wire neoprene cord

View Deal at Amazon
more infoarrow_drop_down

Product Features

  • Pumps 43-Gallons per minute with 5-Foot head
  • Shut-off head: 19.25-Feet
  • On point: 7-1/4-Inch, off point: 3-Inch
  • Passes 1/2-Inch spherical solids

Shut-off head: 19.25-feet Passes 1/2-inch spherical solids On point: 7-1/4-inch, off point: 3-inch Pumps 43-gallons per minute with 5-foot head

3
9.5
SCORE
Liberty Pumps 253 1/3-Horse Power 1-1/2-Inch Discharge 250-Series Cast Iron Automatic Submersible Sump/Effluent Pump

Liberty Pumps 253 1/3-Horse Power 1-1/2-Inch Discharge 250-Series Cast Iron Automatic Submersible Sump/Effluent Pump

by Liberty Pumps
What We like

Efficient motor design reduces electrical usage by up to 40-percent

View Deal at Amazon
more infoarrow_drop_down

Product Features

  • 1/2-Inch solids handling
  • Maximum discharge head of 21-Foot
  • Pumps up to 50 GPM
  • Wide-angle float with series (piggy-back) plug allows manual operation of pump

1/2-inch solids handling Pumps up to 50 gpm Wide-angle float with series (piggy-back) plug allows manual operation of pump Maximum discharge head of 21-foot

4
9.2
SCORE
Franklin Electric C1 Septic Water High Head Submersible Effluent Pump, 20 GPM, 1/2 HP, 115V

Franklin Electric C1 Septic Water High Head Submersible Effluent Pump

20 GPM, 1/2 HP, 115V

by Franklin Electric
What We like

115V

View Deal at Amazon
more infoarrow_drop_down

Product Features

  • 20 GPM

20 gpm

5
8.8
SCORE
1/2 HP Schaefer E-Series Effluent Septic Pump

1/2 HP Schaefer E-Series Effluent Septic Pump

by Franklin electric
What We like

Stainless steel or thermoplastic discharge and motor bracket are tough and non-corrosive. Both materials are highly resistant to damage by minerals, metals, and other substances typically found in water.

View Deal at Amazon
more infoarrow_drop_down
6
8.5
SCORE
Sta-Rite Step20-2 High-Head Filtered Effluent Pump, Stainless Steel, 1/2 HP, 115V, 20 GPM

Sta-Rite Step20-2 High-Head Filtered Effluent Pump

Stainless Steel, 1/2 HP, 115V, 20 GPM

by Sta-Rite
What We like

Heavy 3/8" (9.5mm) positive drive 300 Series stainless steel hexagonal shaft

View Deal at Amazon
more infoarrow_drop_down

Product Features

  • 1/2 HP, 115 Volt, single-phase, 2-wire
  • Exclusive industry dry-run capability - Serviceable fiberglass reinforced thermoplastic intake screen
  • Superior performance - Stainless steel and composite construction
  • Enclosed and self-lubricated Nylatron shaft-bearing resists wear from sand

Exclusive industry dry-run capability - serviceable fiberglass reinforced thermoplastic intake screen 1/2 hp, 115 volt, single-phase, 2-wire Enclosed and self-lubricated nylatron shaft-bearing resists wear from sand Superior performance - stainless steel and composite construction

7
8.3
SCORE
Little Giant 12372 509204 9SN-CIA-RF Submersible Effluent Pump, 110 Gallons Per Minute

Little Giant 12372 509204 9SN-CIA-RF Submersible Effluent Pump

110 Gallons Per Minute

by Little Giant
What We like

Submersible Effluent Pump

View Deal at Amazon
more infoarrow_drop_down
8
7.4
SCORE
Barnes 101298 Model EHV412 Submersible Effluent Pump, 1/2 hp, 115V, 1 Phase, 2

Barnes 101298 Model EHV412 Submersible Effluent Pump

1/2 hp, 115V, 1 Phase, 2" NPT Discharge, 3450 rpm, Manual, 20' Cord

by Crane Pumps & Systems
What We like

HANDLES SPHERICAL SOLIDS WITHOUT CLOGGING: Each pump is designed with a cast iron vortex impeller to allow for easy and effortless passage of 3/4-inch spherical solids without clogging or backing up

View Deal at Amazon
more infoarrow_drop_down

Product Features

  • LARGE DISCHARGE CAPACITY: This model is designed with a maximum discharge head of 45-Feet and can pump up to 49 GPM
  • DESIGNED TO PUMP GREYWATER: The Barnes Model EHV412 Submersible Effluent Pump is designed for handling greywater from wash basins, showers and baths in typical septic tank and other effluent applications
  • INDUSTRIAL GRADE: Great for commercial applications, the robust design of this pump features a corrosion resistant stainless steel shaft and hardware, a heavy duty industrial carbon/ceramic seal, and oil lubricated ball bearings
  • HEAVY DUTY SPLIT CAPACITOR MOTOR: Every pump features a powerful permanent split capacitor motor for reliable, high performance with a longer motor life and a lower amp draw

Large discharge capacity: this model is designed with a maximum discharge head of 45-feet and can pump up to 49 gpm Heavy duty split capacitor motor: every pump features a powerful permanent split capacitor motor for reliable, high performance with a longer motor life and a lower amp draw Industrial grade: great for commercial applications, the robust design of this pump features a corrosion resistant stainless steel shaft and hardware, a heavy duty industrial carbon/ceramic seal, and oil lubricated ball bearings Designed to pump greywater: the barnes model ehv412 submersible effluent pump is designed for handling greywater from wash basins, showers and baths in typical septic tank and other effluent applications

9
7.4
SCORE
Sta-Rite 20DOM05121 STEP Plus D-Series High Head Submersible Effluent Pump, 20 GPM, 1/2 HP, 115V

Sta-Rite 20DOM05121 STEP Plus D-Series High Head Submersible Effluent Pump

20 GPM, 1/2 HP, 115V

by Sta-Rite
What We like

Heavy 7/16 (12mm) positive drive 300 Series stainless steel hexagonal shaft

View Deal at Amazon
more infoarrow_drop_down

Product Features

  • Superior draw-down capability to 4-1/2 (114mm) vs. 13-1/2 (343mm) on a standard NEMA 4
  • Enclosed and self-lubricated Nylatron shaft-bearing resists wear from abrasives
  • 25% Reduced AMP-draw 9.5 amps vs. 12.7 amps on a standard NEMA 4
  • Cooler and quieter operation eliminates expensive flowinducer sleeves

Superior draw-down capability to 4-1/2 (114mm) vs. 13-1/2 (343mm) on a standard nema 4 25% reduced amp-draw 9.5 amps vs. 12.7 amps on a standard nema 4 Enclosed and self-lubricated nylatron shaft-bearing resists wear from abrasives Cooler and quieter operation eliminates expensive flowinducer sleeves

10
7.4
SCORE
Liberty Pumps 283 Wide Angle Float 1/2 HP Mid Range Head Submersible Sump/Effluent Pump, 1

Liberty Pumps 283 Wide Angle Float 1/2 HP Mid Range Head Submersible Sump/Effluent Pump

1

by Liberty Pumps
What We like

Stainless steel bottom screen - easily removable

View Deal at Amazon
more infoarrow_drop_down

Product Features

  • 416 stainless steel rotor shaft - Epoxy powder coat finish
  • Permanently lubricated upper and lower ball bearing
  • All fasteners - corrosion-resistant stainless steel
  • Vortex style impeller permitting passage of solids up to 3/4"

Permanently lubricated upper and lower ball bearing 416 stainless steel rotor shaft - epoxy powder coat finish Vortex style impeller permitting passage of solids up to 3/4" All fasteners - corrosion-resistant stainless steel

Related Products
10 Best Demand Hot Water Propanes
10 Best Demand Hot Water Propanes
10 Best Noritz Natural Gas Water Heaters
10 Best Noritz Natural Gas Water Heaters
10 Best Sta Rite Well Pumps
10 Best Sta Rite Well Pumps
10 Best Sump Pumps For Basement
10 Best Sump Pumps For Basement
10 Best Septic Submersible Pumps
10 Best Septic Submersible Pumps
10 Best Submersible Effluent Pumps
10 Best Submersible Effluent Pumps

Just Updated

10 Best Brasscraft Ovens Ranges
10 Best Brasscraft Ovens Ranges
10 Best General Pipe Cleaners Decking Railings
10 Best General Pipe Cleaners Decking Railings
10 Best Takagi All Heaters
10 Best Takagi All Heaters
10 Best Water Pressure Switches
10 Best Water Pressure Switches
10 Best Plastic Supply Pipes And Fittings
10 Best Plastic Supply Pipes And Fittings
10 Best American Standard Shower Faucets
10 Best American Standard Shower Faucets
10 Best Diversitech All Heaters
10 Best Diversitech All Heaters
10 Best Green Plumbing Parts
10 Best Green Plumbing Parts
10 Best Artifacts Trading Plumbing Parts
10 Best Artifacts Trading Plumbing Parts
10 Best Robertshaw Thermostats
10 Best Robertshaw Thermostats

expand_less

I Agree
We use cookies to enhance and personalise your experience with us by collecting information about the pages you visit and actions taken on the site. More details