10 Best Danco Toilets
for August 2021

Recommendations are independently chosen by MOOZ’s editors. Purchases you make through our links may earn us a commission.

1
9.9
SCORE
DANCO Spring-Loaded Toilet Paper Holder Rod, White, 1-Set (88648),

DANCO Spring-Loaded Toilet Paper Holder Rod

White, 1-Set (88648),

by Danco, Inc.
What We like

Durable plastic construction

more infoarrow_drop_down

Product Features

  • This holder is constructed out of durable plastic.
  • Spring loaded
  • At this size, this will fit most pre-exisitng toilet brackets for the sake of simplicity of installation.
  • Fits most toilet brackets
  • For optimal performance, this holder is spring-loaded with universal tapered tips.

White finish At this size, this will fit most pre-exisitng toilet brackets for the sake of simplicity of installation. This holder is constructed out of durable plastic. Not only does it fit most brackets, but the tissue holder's color (white) will match most of your preexisting fixtures. With a standard size length of 6.25 inches, width between 0.289 and 0.291 inches and a height between 0.190 and 0.193 inches, this could be the perfect fit for your bathroom. Spring loaded Fits most toilet brackets For optimal performance, this holder is spring-loaded with universal tapered tips.

2
9.5
SCORE
NEXT BY DANCO All-in-One Toilet Installation Kit | Perfect Seal Wax Ring & Zero Cut Bolts | Toilet Repair | Wax-Free | Mounting Toilet Bolts (10879X)

NEXT BY DANCO All-in-One Toilet Installation Kit

Perfect Seal Wax Ring & Zero Cut Bolts, Toilet Repair, Wax-Free, Mounting Toilet Bolts (10879X)

by Next by Danco
What We like

NO CUTTING REQUIRED: brass and stainless steel bolts are adjustable up to 3 inches and can be easily turned by hand for perfect height. The SLIDING ADAPTERS tighten the bolts and the low-profile caps featuer an easy lock and release mechanism

more infoarrow_drop_down

Product Features

  • NO MESS: Perfect Seal has a hidden wax ring which causes no mess and 3X's stronger seal than regular wax rings
  • HELPFUL TIP: When toilet does not sit flush to the floor, the black plsatic ring inside the gray rubber casing can be removed allowing the Perfect Seal to be fully compressed
  • REPOSITIONING CAPABILITY: Both the Perfect Seal and Zero Cut Bolts allow for multiple toilet repositions as needed during installation
  • WORKS WITH FLANGES that are 1/2 inch ABOVE the floor or 1-1/2 inches BELOW the floor for installation compatibility with most toilet situations

Helpful tip: when toilet does not sit flush to the floor, the black plsatic ring inside the gray rubber casing can be removed allowing the perfect seal to be fully compressed Works with flanges that are 1/2 inch above the floor or 1-1/2 inches below the floor for installation compatibility with most toilet situations No mess: perfect seal has a hidden wax ring which causes no mess and 3x's stronger seal than regular wax rings Repositioning capability: both the perfect seal and zero cut bolts allow for multiple toilet repositions as needed during installation

3
9.1
SCORE
Danco Company 89449 Nickle PVD Toil Tank Lever Toilet Handle, Brushed Nickel

Danco Company 89449 Nickle PVD Toil Tank Lever Toilet Handle

Brushed Nickel

by Danco
What We like

IDEAL for bathroom remodel or upgrades to a brushed nickel finished look that matches well with modern bathroom styles.

more infoarrow_drop_down

Product Features

  • EASY TO INSTALL - simply trim arm to size needed
  • DURABLE brass construction provides strength and reliability against the rigors of everyday use. Polished brass finish resists scratching, fading and tarnishing
  • SAY GOODBYE to sticky handles, corroded trip levers, outdated bathroom designs and broken levers
  • UPDATE BATHROOM FIXTURES with this decorative toilet handle designed to fit front or angle mounted applications (not suited for left side mounting applications)

Durable brass construction provides strength and reliability against the rigors of everyday use. polished brass finish resists scratching, fading and tarnishing Easy to install - simply trim arm to size needed Say goodbye to sticky handles, corroded trip levers, outdated bathroom designs and broken levers Update bathroom fixtures with this decorative toilet handle designed to fit front or angle mounted applications (not suited for left side mounting applications)

4
9
SCORE
Danco 80816 Complete Toilet Repair Kit Fill Valve, Flapper, Rod, Float Replacement, White

Danco 80816 Complete Toilet Repair Kit Fill Valve

Flapper, Rod, Float Replacement, White

by Danco
What We like

BUILT TO LAST: The durable plastic and rubber constructions provides strength and durability which allows for optimal performance.

more infoarrow_drop_down

Product Features

  • TOILET FILL VALVE DIMENSIONS: The fill valve height is approximately 8.5 inches from the bottom of inside the tank.
  • TOILET BALL ROD FLOAT & BALL FLOT DIMENSIONS: The length of the brass rod is 7.75 and the length of the float is 5.5; when the brass road is threaded into both the float and threaded into the fill valve, the total length of the rod and float ends up being about 11.75.
  • EASY TO INSTALL: Easy installation instructions with the need for common household tools such as screwdriver and adjustable wrench.
  • TOILET FLAPPER DIMENSIONS: The toilet flapper is ideal to replace worn-out flappers and is designed to fit 2 in. toilet flush valves.
  • COMPLETE TOILET REPAIR KIT INCLUDES: Universal flapper with adapter, spring, float with rod, and ballcock with refill tube.

Easy to install: easy installation instructions with the need for common household tools such as screwdriver and adjustable wrench. Toilet ball rod float & ball flot dimensions: the length of the brass rod is 7.75 and the length of the float is 5.5; when the brass road is threaded into both the float and threaded into the fill valve, the total length of the rod and float ends up being about 11.75. Single-flush applications: this toilet repair kit works for standard single-flush applications. Toilet flapper dimensions: the toilet flapper is ideal to replace worn-out flappers and is designed to fit 2 in. toilet flush valves. Toilet repair kit: the Danco toilet repair kit includes replacement parts for the most common toilet parts that cause a leaky toilet and will restore your toilet to its original working condition. Complete toilet repair kit includes: universal flapper with adapter, spring, float with rod, and ballcock with refill tube. Toilet fill valve dimensions: the fill valve height is approximately 8.5 inches from the bottom of inside the tank.

5
8.9
SCORE
DANCO Coast Mark IV Anti-Siphon Ballcock Toilet Tank Repair Kit, White/Black, 1-Pack (88915)

DANCO Coast Mark IV Anti-Siphon Ballcock Toilet Tank Repair Kit

White/Black, 1-Pack (88915)

by Danco
What We like

EASY TO INSTALL - this anti-siphon ballcock will replace any Mark IV models

more infoarrow_drop_down

Product Features

  • KIT INCLUDES (1) float, (1) flapper, (1) tank lever
  • DURABLE plastic construction with reliable performance
  • PRODUCT HEIGHT is 12 inches when installed
  • SAVE WATER AND MONEY by replacing your ballcock with this one piece design

Save water and money by replacing your ballcock with this one piece design Durable plastic construction with reliable performance Product height is 12 inches when installed Kit includes (1) float, (1) flapper, (1) tank lever

6
8.8
SCORE
Danco 10062P Universal Stick On Toilet Seat Bumpers, 2 Pack, White, 2 Count

Danco 10062P Universal Stick On Toilet Seat Bumpers

2 Pack, White, 2 Count

by Danco
What We like

EASY TO USE: Thoroughly clean the toilet seat rings and keep it clean and dry, peel off the self-adhesive back on the toilet seat bumper and stick it on the toilet seat rings, press hard to ensure it can stick firmly (do not use for 10 minutes after installation)

more infoarrow_drop_down

Product Features

  • INCLUDES: (4) round toilet seat bumpers (2-1/4 inches long and 3/4 inches wide with a thickness/height of 1/4 inches) and (4) oblong bumpers toilet seat bumpers (3/4 inches outer diameter with a thickness/height of 1/4 inches)
  • UNIVERSAL DESIGN: Universal design to fit most makes and models of toilet seats (works best with a toilet seat that has a smooth surface)
  • CUSTOM-FIT ADHESIVE PADS: Attaches to toilet seat with durable custom-fit adhesive pads that help safeguard and protect your toilet seat
  • EXTRA CUSHIONING: Replaces snap-in, screw-in and tack-on type toilet seat bumpers and the stick on rubber construction with white finish blends with most existing toilet and bathroom fixtures

Includes: (4) round toilet seat bumpers (2-1/4 inches long and 3/4 inches wide with a thickness/height of 1/4 inches) and (4) oblong bumpers toilet seat bumpers (3/4 inches outer diameter with a thickness/height of 1/4 inches) Universal design: universal design to fit most makes and models of toilet seats (works best with a toilet seat that has a smooth surface) Custom-fit adhesive pads: attaches to toilet seat with durable custom-fit adhesive pads that help safeguard and protect your toilet seat Extra cushioning: replaces snap-in, screw-in and tack-on type toilet seat bumpers and the stick on rubber construction with white finish blends with most existing toilet and bathroom fixtures

7
8.6
SCORE
Danco, Inc. Toilet Tank Lever for Mansfield Chrome (80371)

Danco

Inc. Toilet Tank Lever for Mansfield Chrome (80371)

by Danco, Inc.
What We like

EASY TO INSTALL The easy installation makes it a perfect DIY project for anyone looking to replace a toilet handle

more infoarrow_drop_down

Product Features

  • CAPATIBILITY - With an OEM reference of #42, this tank lever can be used for Mansfield flush valves #s 160, 208, 209, 210, 211. They are intended to work with a canister type flush valve. Lever is NOT intended to be used with chain and flapper flush valve applications
  • CHROME FINISH - The lever handle has a great shiny chrome finish to complement existing bathroom fixtures
  • DURABLE CONSTRUCTION - With a strong and durable plastic handle with metal arm construction, this tank lever will last
  • 10-INCH ARM LENGTH - At a maximum flush arm length of 10 inches, this can very easily fit for your needs
  • Water consumption: 5.0 gallons_per_flush

10-inch arm length - at a maximum flush arm length of 10 inches, this can very easily fit for your needs Durable construction - with a strong and durable plastic handle with metal arm construction, this tank lever will last Capatibility - with an oem reference of #42, this tank lever can be used for mansfield flush valves #s 160, 208, 209, 210, 211. they are intended to work with a canister type flush valve. lever is not intended to be used with chain and flapper flush valve applications Chrome finish - the lever handle has a great shiny chrome finish to complement existing bathroom fixtures Water consumption: 5.0 gallons_per_flush

8
8.1
SCORE
Danco Premium Silicone Toilet Tank Flapper and Chain for Toto Power Toilets | Flapper Replacement | Teal | 1 Pack (88874)

Danco Premium Silicone Toilet Tank Flapper and Chain for Toto Power Toilets

Flapper Replacement, Teal, 1 Pack (88874)

by Danco, Inc.
What We like

BRIGHT TEAL finish and EASY INSTALLATION

more infoarrow_drop_down

Product Features

  • PREMIUM FLAPPER for use on all Toto power toilets
  • SILICONE TREATED and chloramines resistant constructed of durable rubber
  • ELIMINATE RUNNING toilets by replacing your toilet tank flapper with a positive seal flapper for Toto toilets
  • USED ON over-sized flush valves with 3-inch openings

Premium flapper for use on all toto power toilets Used on over-sized flush valves with 3-inch openings Silicone treated and chloramines resistant constructed of durable rubber Eliminate running toilets by replacing your toilet tank flapper with a positive seal flapper for toto toilets

9
8.1
SCORE
Danco 40121 Plastic Toilet Float, Black

Danco 40121 Plastic Toilet Float

Black

by Danco, Inc.
What We like

Easy installation

more infoarrow_drop_down

Product Features

  • Black finish
  • For use with all toilets
  • Molded in one piece

Molded in one piece Black finish For use with all toilets

10
8.1
SCORE
Danco 88192 Tank to Bowl Toilet Repair Kit for Crane

Danco 88192 Tank to Bowl Toilet Repair Kit for Crane

by Danco
What We like

Durable construction

more infoarrow_drop_down

Product Features

  • For use with Crane toilets
  • Bolt size: 3/8 in. x 3-1/4 in.
  • Kit includes 2 tank bolts with washers and nuts and 1 sponge rubber spud gasket

Bolt size: 3/8 in. x 3-1/4 in. Kit includes 2 tank bolts with washers and nuts and 1 sponge rubber spud gasket For use with crane toilets

expand_less

I Agree
We use cookies to enhance and personalise your experience with us by collecting information about the pages you visit and actions taken on the site. More details