Top 10 Best CUTTING Jigs
for January 2022

Recommendations are independently chosen by MOOZ’s editors. Purchases you make through our links may earn us a commission.

1
9.7
SCORE
Milescraft 1210 SmallCircleCompass - Router Circle Cutting Jig

Milescraft Inc. Milescraft 1210 SmallCircleCompass

Router Circle Cutting Jig

by Milescraft
What We like

Quickly and easily attaches to the included turn-n-lock circle guide head

more infoarrow_drop_down

Product Features

  • Built-in imperial and metric scales, with an easy readout window for setting the diameter of both your inside and outside cuts
  • Cut small circles from 1. 5 in diameter to 12 in diameter

Built-in imperial and metric scales, with an easy readout window for setting the diameter of both your inside and outside cuts Cut small circles from 1. 5 in diameter to 12 in diameter

2
9.7
SCORE
Fulton Taper Cutting Jig For Creating Tapered Angles Up to 15 Degrees on Your Table Saw 24 Inch Long Aluminum Rails with Scale and Stop

Fulton Taper Cutting Jig For Creating Tapered Angles Up to 15 Degrees on Your Table Saw 24 Inch Long Aluminum Rails with Scale and Stop

by Fulton
What We like

Constructed of durable aluminum the Fulton Taper Cutting Jig comes with an easy grip handle, adjustable 24 inch rails with fixed stop, easy-to-read graduated scale that measures 0 to 15 degrees of taper (or 3 inches per foot) and full instruction sheet.

more infoarrow_drop_down

Product Features

  • Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. This easy to use jig is fully adjustable for right or left hand use. As well as its ability to work on either the left or right side of your table saw fence.
  • Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. Making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand.
  • Two ways to set the jig. First use the scale that has markings up to 15 degrees of taper. Second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. Then simply adjust the taper jig to match those two marks.
  • The Fulton Taper Cutting Jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. Perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common.

Our taper jig will most certainly enhance your woodworking abilities and your woodworking projects. this easy to use jig is fully adjustable for right or left hand use. as well as its ability to work on either the left or right side of your table saw fence. The Fulton taper cutting jig has been designed to make long rip cuts at angles from 1 deg to 15 degrees using your table saw. perfect for building woodworking projects like table legs, chair legs, magazine racks and more where slight tapers are common. Two ways to set the jig. first use the scale that has markings up to 15 degrees of taper. second mark the starting cut at one end and then mark the exit cut at the other end of your piece of stock. then simply adjust the taper jig to match those two marks. Table saws are designed to rip stock parallel to the fence or cross-cut stock at various angles with a miter gauge. making long rip cuts at angles from 1 deg to 15 degrees on a table saw without a jig can be challenging and dangerous attempting free hand.

3
9.5
SCORE
Jasper 200J Model 200 Circle Cutting Jig for Plunge Router

Jasper Tools Jasper 200J Model 200 Circle Cutting Jig for Plunge Router

by Jasper Tools
What We like

Easily read scale is calibrated for a 1/4-inch router bit

more infoarrow_drop_down

Product Features

  • Precision-drilled pivot holes keep pins in selected holes
  • Cuts 256 different circles from 2-1/4 to 18-3/16-inches in diameter
  • Circle cutting jig is great for making speaker cutouts
  • Mounts directly to the base of 19 different models of plunge routers

Cuts 256 different circles from 2-1/4 to 18-3/16-inches in diameter Mounts directly to the base of 19 different models of plunge routers Circle cutting jig is great for making speaker cutouts Precision-drilled pivot holes keep pins in selected holes

4
9.1
SCORE
POWERTEC 71212 Router Circle Jig | For Cutting Circles with Diameters from 10

POWERTEC 71212 Router Circle Jig

For Cutting Circles with Diameters from 10" to 53", Melamine Coated 7 Layer Plywood, Includes Two Center Pins & Hardware Pack & Easy Read Manual, Easy Install/Use

by POWERTEC
What We like

Easy install: Features an easy-to-use, intuitive design - Plus with two included center pins - one for applications where the user wants a center hole and the other where no viewable center hole is desired - great for the professional woodworkers and DIY enthusiasts alike

more infoarrow_drop_down

Product Features

  • Features: our Router hole cutting Jig showcases predrilled hole patterns that make for easy mounting onto most popular routers on todays market - easy to customize if hole pattern doesn't fit your model, simple drill necessary holes - Lighter weight than similar jigs for more comfortable use
  • Function: high-efficiency Router circle cutting Jig allows you to rout perfectly crafted circles with diameters ranging from 10" All the way to 53" - ideal for use when creating tables, clocks, round frames and signs, cartwheels - and any other circular projects that your heart desires and your imagination can think up
  • VERSATILE COMPATIBILITY: Router Circle Jig accommodates to the following router makes/models: Porter-Cable (690 series, and models 7529, 8529), Bosch (1617, 1618), Craftsman (315 275 000, 3175 175 040, 315 175 050, 315 175 070), Fein (FT 1800), Milwaukee (5615, 5616, 5619), Makita (RF1101), Hitachi (M8V, M-12VC, TR12), Elu (177), DeWALT (DW621, DW616 series, DW625, DW618), RyobiR1631K.
  • Sturdy construction/included: circle Router Jig is constructed from melamine-coated 7-layer plywood for strength, stability, and lightweight high-performance - long Compass design for greater range - use in both hard and soft woods; included: (1) Easy to read manual (1) big Router Compass circle Jig (2) insert pins (1) 5/16-18 tee-bolt pivot pin (1) 4-point 5/16-18 knob and washer (2) 1/4-20 screws (3) # 10-24 screws (3) # 8-32 screws and (4) # 10-32 screws

Versatile compatibility: router circle jig accommodates to the following router makes/models: porter-cable (690 series, and models 7529, 8529), bosch (1617, 1618), craftsman (315 275 000, 3175 175 040, 315 175 050, 315 175 070), fein (ft 1800), milwaukee (5615, 5616, 5619), makita (rf1101), hitachi (m8v, m-12vc, tr12), elu (177), dewalt (dw621, dw616 series, dw625, dw618), ryobir1631k. Features: our router hole cutting jig showcases predrilled hole patterns that make for easy mounting onto most popular routers on todays market - easy to customize if hole pattern doesn't fit your model, simple drill necessary holes - lighter weight than similar jigs for more comfortable use Sturdy construction/included: circle router jig is constructed from melamine-coated 7-layer plywood for strength, stability, and lightweight high-performance - long compass design for greater range - use in both hard and soft woods; included: (1) easy to read manual (1) big router compass circle jig (2) insert pins (1) 5/16-18 tee-bolt pivot pin (1) 4-point 5/16-18 knob and washer (2) 1/4-20 screws (3) # 10-24 screws (3) # 8-32 screws and (4) # 10-32 screws Function: high-efficiency router circle cutting jig allows you to rout perfectly crafted circles with diameters ranging from 10" all the way to 53" - ideal for use when creating tables, clocks, round frames and signs, cartwheels - and any other circular projects that your heart desires and your imagination can think up

5
8.9
SCORE
CIRCLE CUTTING ROUTER JIG

CIRCLE CUTTING ROUTER JIG

by Rockler
What We like

Mounts quickly to many popular routers made by Porter Cable, Makita, Hitachi, DeWalt, and Bosch

more infoarrow_drop_down

Product Features

  • Includes Two Center Pivot Pins, T-bolt with 4-star tightening knob
  • Includes mounting hardware to fit a variety of routers
  • Cut circles from 10" to 52" in diameter
  • Tough, long-lasting phenolic core

Tough, long-lasting phenolic core Cut circles from 10" to 52" in diameter Includes mounting hardware to fit a variety of routers Includes two center pivot pins, t-bolt with 4-star tightening knob

6
8.8
SCORE
Jasper Tools M 300 Pro Router Circle Cutting Jig

Jasper Tools M 300 Pro Router Circle Cutting Jig

by Jasper Tools
What We like

Circle Jig designed for making tabletops

more infoarrow_drop_down

Product Features

  • Calibrated for a 1/2-inch Router bit
  • Weighs 1.6 pounds shipped
  • Tabletops range in size from 7 to 52-3/4 inches
  • Makes 184 different size tabletops in 1/4-inch increments

Weighs 1.6 pounds shipped Calibrated for a 1/2-inch router bit Tabletops range in size from 7 to 52-3/4 inches Makes 184 different size tabletops in 1/4-inch increments

7
8.5
SCORE
Bench Dog 10-027 Polymer Crown-Cut Crown Molding Cutting Jig

Bench Dog 10-027 Polymer Crown-Cut Crown Molding Cutting Jig

by Bench Dog
What We like

Made from durable polymer in the USA.

more infoarrow_drop_down

Product Features

  • Fits all 10" and larger miter saws.
  • Eliminates trial and error.
  • The safest and easiest way to cut crown molding.
  • Crown-Cut crown molding cutting jig.

Fits all 10" and larger miter saws. Eliminates trial and error. The safest and easiest way to cut crown molding. Crown-cut crown molding cutting jig.

8
8.3
SCORE
Megacast Premium Tube Cutting Jig w/Scale

Megacast Premium Tube Cutting Jig w/Scale

by Megacast
What We like

Megacast premium tube cutting jig is used to hold tubing or rods up to 1/8" diameter

more infoarrow_drop_down

Product Features

  • Make perfectly straight cuts with ease
  • The graduated scale on the side of this jig is convenient for measuring the distance between cuts to get the correct length of tube every time
  • The scale ranges from 0-30 mm. Overall height measures 5"
  • Offers both 90 degrees and 45-degree angle slots for cutting

The graduated scale on the side of this jig is convenient for measuring the distance between cuts to get the correct length of tube every time The scale ranges from 0-30 mm. overall height measures 5" Offers both 90 degrees and 45-degree angle slots for cutting Make perfectly straight cuts with ease

9
8.3
SCORE
ZepReloading, (Vonzep) 300 Blackout case Cutting jig with auto Lock and auto Ejection.

Generic ZepReloading

(Vonzep) 300 Blackout case Cutting jig with auto Lock and auto Ejection.

by ZEP Reloading LLC
What We like

300 blackout case cutting jig with auto lock and automatic ejections. Hard coat MIL-SPEC anodized

more infoarrow_drop_down
10
8.3
SCORE
Premium Tube Cutting Jig With Scale - SFC Tools - 53-185

SFC TOOLS Premium Tube Cutting Jig With Scale

SFC Tools, 53-185

by SFC Tools
What We like

This premium tube cutting jig is used to hold tubing or rods up to 1/8" diameter

more infoarrow_drop_down

Product Features

  • The scale ranges from 0-30 mm. Overall height measures 5"
  • The graduated scale on the side of this jig is convenient for measuring the distance between cuts to get the correct length of tube every time
  • Offers both 90 degree and 45 degree angle slots for cutting
  • Make perfectly straight cuts with ease

The scale ranges from 0-30 mm. overall height measures 5" Make perfectly straight cuts with ease The graduated scale on the side of this jig is convenient for measuring the distance between cuts to get the correct length of tube every time Offers both 90 degree and 45 degree angle slots for cutting

expand_less

I Agree
We use cookies to enhance and personalise your experience with us by collecting information about the pages you visit and actions taken on the site. More details