Top 10 Best Ate Tools Power Drill Accessories
for December 2021

Recommendations are independently chosen by MOOZ’s editors. Purchases you make through our links may earn us a commission.

1
9.7
SCORE
Hi-Spec 43 Piece 1/4”Hex Shank Impact Driver Screw Bits Set. Drill Driver Power Tool Accessories for DIY Repairs, Installing Fixtures & Fittings, Screwing & Fastening

Hi-Spec 43 Piece 1/4”Hex Shank Impact Driver Screw Bits Set. Drill Driver Power Tool Accessories for DIY Repairs

Installing Fixtures & Fittings, Screwing & Fastening

by Hi-Spec Products
What We like

HIGH IMPACT: The impact driver is among the most popular cordless power tools today for driving screws and other fastening tasks. From breaking loose a stuck nut to driving screws and fasteners into hard materials like metal, the Hi-Spec 44 Piece 1/4 Hex Shank Impact Driver Screw Bits Set is specifically designed for the rigours of use with an impact driver, withstanding its high torque and concussive effects for extended periods of time

more infoarrow_drop_down

Product Features

  • IMPACT RANGE: 30pc 25mm Philips: PH#1-1-2-2-3-3; Slotted SL1/8-5/32-3/16-7/32-1/4-1/4; Pozidriv PZ1-2-3; SQ#1-2-2-3; HEX/ALLEN H1/8-5/32-3/16-1/4; Torx T10-15-20-25-27-30-40; 8pc 50mm Philips: PH#1-2-3; Slotted SL5/32-3/16-7/32-1/4; Square SQ #2; 75mm Philips PH#2; Sockets 1/4-5/16; 64mm Connector for 3/8 Drive Sockets; 35mm Countersink Bit; 120mm Retracting Screw Sleeve Holder for easy holding of screws and initial turning of long fasteners into holes eliminating wobbling and slipping
  • TIME TO IMPACT: Made from heat treated S2 Shock-resisting steel, the addition of silicon gives increased tempered hardness, with Rockwell C Hardness of 60, as compared to ordinary Cr-V. Ductility gives the ability to twist and flex under the high torque and concussive effects of impact drivers. A manganese phosphate coating gives improved corrosion and wear resistance whilst retaining the light oil protective coating. 6.35mm / 1/4" hex shanks enable quick change out and no slipping in chucks
  • METAL TO METAL IMPACT: The Hi-Spec 44 Piece 1/4 Hex Shank Impact Driver Bits are designed and rated to outperform standard bits when the maximum torque of the impact driver is applied high torque that snaps normal bits on the first try. Metal to metal fastening needs high torque to break the friction between the metals. High torque is delivered to tighten down fasteners in hard-stop fastening. And high torque is applied to pound nut drivers turning long lag-bolts

Impact range: 30pc 25mm philips: ph#1-1-2-2-3-3; slotted sl1/8-5/32-3/16-7/32-1/4-1/4; pozidriv pz1-2-3; sq#1-2-2-3; hex/allen h1/8-5/32-3/16-1/4; torx t10-15-20-25-27-30-40; 8pc 50mm philips: ph#1-2-3; slotted sl5/32-3/16-7/32-1/4; square sq #2; 75mm philips ph#2; sockets 1/4-5/16; 64mm connector for 3/8 drive sockets; 35mm countersink bit; 120mm retracting screw sleeve holder for easy holding of screws and initial turning of long fasteners into holes eliminating wobbling and slipping Metal to metal impact: the hi-spec 44 piece 1/4 hex shank impact driver bits are designed and rated to outperform standard bits when the maximum torque of the impact driver is applied high torque that snaps normal bits on the first try. metal to metal fastening needs high torque to break the friction between the metals. high torque is delivered to tighten down fasteners in hard-stop fastening. and high torque is applied to pound nut drivers turning long lag-bolts Time to impact: made from heat treated s2 shock-resisting steel, the addition of silicon gives increased tempered hardness, with rockwell c hardness of 60, as compared to ordinary cr-v. ductility gives the ability to twist and flex under the high torque and concussive effects of impact drivers. a manganese phosphate coating gives improved corrosion and wear resistance whilst retaining the light oil protective coating. 6.35mm / 1/4" hex shanks enable quick change out and no slipping in chucks

2
9.5
SCORE
AUTOTOOLHOME 105 Degree Right Angle Driver Drilling and Driving Power Screwdriver Drill Attachment Adapter with 1/4-inch Hex Quick Change Drive and Magnetic Bit Socket

AUTOTOOLHOME 105 Degree Right Angle Driver Drilling and Driving Power Screwdriver Drill Attachment Adapter with 1/4-inch Hex Quick Change Drive and Magnetic Bit Socket

by JYC International Trade Co., Ltd.
What We like

Right angle driver made of Chrome Vanadium steel, high hardness angle drill bit holder, anti rust. durable die cast body with 3 ball bearings for long life. Built in strong magnet for good holding power, this right angle drill attachment is easy to use and avoid falling off.

more infoarrow_drop_down

Product Features

  • 105 degrees angle extension, in which you use when you have hard places to get to,360 degree adjustable thumb flange.It can connect hand drill and manual wrench.The function head is equipped with a locking and magnetic device, to ensure that the sleeve does not fall.Built-in strong magnet for good holding power, accepts all 1/4" standard hexagon shank bits.Apply to all electric drill and socket wrench, which allows to reach unreachable or tight spaces.
  • 105Angle Extension 1/4inch 6mm Hex Drill Bit Screwdriver Socket Holder Adaptor, 1/4 inch hex drive shaft is quick change compatible and fits most power drill, rechargeable drill, manual wrench and driver chucks,Magnetic 1/4 inch hex socket accepts and holds standard drill and driver bits.
  • The angle extension gears are mounted in a die cast with 3 durable ball bearings. Strong bulid-in magnetic socket holds standard hex drilling and drive bits, avoid falling.105 designs for tight spaces, extends the power of a cordless screwdriver, max torque: 10n/m.105 degree right angle head, designs for tight spaces, extends the power of a cordless screwdriver.Extends power of cordless screwdrivers-100 in/lbs. torque, 400 RPM.

105angle extension 1/4inch 6mm hex drill bit screwdriver socket holder adaptor, 1/4 inch hex drive shaft is quick change compatible and fits most power drill, rechargeable drill, manual wrench and driver chucks,magnetic 1/4 inch hex socket accepts and holds standard drill and driver bits. The angle extension gears are mounted in a die cast with 3 durable ball bearings. strong bulid-in magnetic socket holds standard hex drilling and drive bits, avoid falling.105 designs for tight spaces, extends the power of a cordless screwdriver, max torque: 10n/m.105 degree right angle head, designs for tight spaces, extends the power of a cordless screwdriver.extends power of cordless screwdrivers-100 in/lbs. torque, 400 rpm. 105 degrees angle extension, in which you use when you have hard places to get to,360 degree adjustable thumb flange.it can connect hand drill and manual wrench.the function head is equipped with a locking and magnetic device, to ensure that the sleeve does not fall.built-in strong magnet for good holding power, accepts all 1/4" standard hexagon shank bits.apply to all electric drill and socket wrench, which allows to reach unreachable or tight spaces.

3
9.2
SCORE
Rocaris 12 Pack 1/4 Inch Hex Shank Long Magnetic Screwdriver Bits Set 4 in Power Tools (Slotted+Cross Head)

Rocaris 12 Pack 1/4 Inch Hex Shank Long Magnetic Screwdriver Bits Set 4 in Power Tools (Slotted+Cross Head)

by Rocaris
What We like

Fit for electric screwdrivers, hand screwdrivers, electric drills, air drills and so forth

more infoarrow_drop_down

Product Features

  • Those Screwdriver Bits are made of S2 alloy steel which is anti-impact and tough, great wear resistant
  • With 1/4 inch hex shaft, they are widely used on electric screwdrivers, hand screwdrivers, cordless drills, etc
  • Strong magnetic, good workmanship, high precision. each edge can be accurately locked screws, no damage to the screw and the screwdriver head
  • There are different type screwdriver bit heads ,such as: Slotted head, cross head, which convenient to you, can meet your varied requirements

Strong magnetic, good workmanship, high precision. each edge can be accurately locked screws, no damage to the screw and the screwdriver head Those screwdriver bits are made of s2 alloy steel which is anti-impact and tough, great wear resistant There are different type screwdriver bit heads ,such as: slotted head, cross head, which convenient to you, can meet your varied requirements With 1/4 inch hex shaft, they are widely used on electric screwdrivers, hand screwdrivers, cordless drills, etc

4
9
SCORE
DEWALT DWD210G 10-Amp 1/2-Inch Pistol-Grip Drill with DEWALT DW2166 45 Piece Screwdriving Set with Tough Case

DEWALT DWD210G 10-Amp 1/2-Inch Pistol-Grip Drill with DEWALT DW2166 45 Piece Screwdriving Set with Tough Case

What We like

BIT RETENTION: Tough Case container bit retention system keeps bits secure

more infoarrow_drop_down

Product Features

  • Delivers increased drilling performance and increased overload protection for added durability
  • VALUE: $40 value vs. purchasing separately
  • This product is manufactured in Mexico

Value: $40 value vs. purchasing separately Delivers increased drilling performance and increased overload protection for added durability This product is manufactured in mexico

5
8.6
SCORE
MAPORCH Magnetic Bit Holder 1/4 Inch Hex Shank Bit Tip Holder Drill Extension 4 Pack Set for Screws, Nuts, Drills and Handheld Driver with Stainless High Speed Steel

MAPORCH Magnetic Bit Holder 1/4 Inch Hex Shank Bit Tip Holder Drill Extension 4 Pack Set for Screws

Nuts, Drills and Handheld Driver with Stainless High Speed Steel

by Maporch
What We like

10X EXTRA DURABILITY: Made of High Speed carbon steel typically for drill bit holder allows you to fasten screws even how hard your surface is, such as iron roof, wood, wall . and enables an excellent fit to screw heads with a close tolerance on hardness and torque performance -resulting in one of the most efficient accessories available. Calibrated, heat treated hex shaft for added durability.

more infoarrow_drop_down

Product Features

  • ELIMINATES SLIPPING SCREWS : Using 3x extra magnetism inside the bit holder makes screw holder extremely magnetic, Non wobbling or slipping while driving screws going on and Magnetic bit holder also provides convenient pick-up and retention of screws.
  • MULTIPURPOSE : This impact bit holder is applicable to many repairs, assembly, maintenance jobs, ... machines, equipment, and widgets. Its height is 60mm ( 2-3 /8) that provides enough extensions for your impact driver to reach farther and to fasten even hard-to-reach place.
  • PERFECT LATEST DESIGN: 1/4 inch hex shank extension bit holder fits with almost familiar kinds of impact drivers on the market. Extended torsion zone helps to absorb high torque of new impact drivers.

eliminates slipping screws : using 3x extra magnetism inside the bit holder makes screw holder extremely magnetic, non wobbling or slipping while driving screws going on and magnetic bit holder also provides convenient pick-up and retention of screws. multipurpose : this impact bit holder is applicable to many repairs, assembly, maintenance jobs, ... machines, equipment, and widgets. its height is 60mm ( 2-3 /8) that provides enough extensions for your impact driver to reach farther and to fasten even hard-to-reach place. perfect latest design: 1/4 inch hex shank extension bit holder fits with almost familiar kinds of impact drivers on the market. extended torsion zone helps to absorb high torque of new impact drivers.

6
8.5
SCORE
SEDY 10pc Magnetic Collar Design 1/4

SEDY 10pc Magnetic Collar Design 1/4" Hex Shank PH2 Double End Magnetic Phillips Cross Screwdriver Bits Set

S2 Steel Impact Grade Magnetic Drywall Screw Setter Electric Power Driver Bit Set

by SEDY
What We like

Magnetic spring collar design can limit screw penetration and damage to board, more easy to install the drywall screws. You don't even need to use your hand to lock the screw easily, which greatly reduces the difficulty and injury risk that you often encounter in the work.

more infoarrow_drop_down

Product Features

  • 1/4 Inch quick-change hex shank phillips cross PH2 head screwdriver bit widely used on electric screwdrivers, hand screwdrivers, electric drills, air drills, etc. Total Length: 65mm / 2-1/2 Inch.
  • Made of S2 alloy steel with heat treated for maximum durability, anti-impact, resist breakage and wear. The surface polishing coating treatment increases their corrosion resistance and wear resistance.
  • This set of products is developed to solve the problems and risks often encountered in the process of screw installation and disassembly, so as to ensure that users can complete their work more conveniently, quickly and safely. This is a set of products worth experiencing.
  • Magnetic Collar & Double Ended Design: Magnetic double end phillips bits for extra versatility and the magnetic screw holder collar can lock the screw in place to make work easily. The screw can be quickly butted and fixed and drill screws to the absolute perfect depth every time.

This set of products is developed to solve the problems and risks often encountered in the process of screw installation and disassembly, so as to ensure that users can complete their work more conveniently, quickly and safely. this is a set of products worth experiencing. Magnetic collar & double ended design: magnetic double end phillips bits for extra versatility and the magnetic screw holder collar can lock the screw in place to make work easily. the screw can be quickly butted and fixed and drill screws to the absolute perfect depth every time. 1/4 inch quick-change hex shank phillips cross ph2 head screwdriver bit widely used on electric screwdrivers, hand screwdrivers, electric drills, air drills, etc. total length: 65mm / 2-1/2 inch. Made of s2 alloy steel with heat treated for maximum durability, anti-impact, resist breakage and wear. the surface polishing coating treatment increases their corrosion resistance and wear resistance.

7
8.2
SCORE
WORKPRO 20V Cordless Drill Combo Kit, Drill Driver and Impact Driver with 47-Piece Impact Bit Set

WORKPRO 20V Cordless Drill Combo Kit

Drill Driver and Impact Driver with 47-Piece Impact Bit Set

What We like

Efficient Drill/ Driver: This 20V Drill Driver can provide powerful torque and also allows you to choose between two speed setting (0 360 RPM or 0 1,300 RPM), so you will always have the power you need. The clutch has a total of 18 different torque settings and 2 modes (driving, drilling), in order to avoid incidents where you apply too much power and then wind up stripping the screw. Large 3/8"(10mm) keyless chuck can provide you superior bit retention

more infoarrow_drop_down

Product Features

  • 2*2.0 Ah Fast Charging Battery: The kit comes with 2*2.0 Ah large capacity Li-ion battery, which means all-day operation is completely feasible and you never need to worry about running out of power in the middle of a project as long as you keep the spare charged up. A 1 hour fast charger(2.4A) can charge one battery in as little as 1 hour.
  • 130Nm Efficient Impact Driver: Powerful motor delivers 1150 in-lb (130Nm) peak torque and 0-3500RPM for large range applications of jobsite.; 1/4" quick load hex chuck offers greater durability, compatibility and tightness for fastening tasks.
  • Durable Construction: Constructed from S2 Alloy Steel of HRC62 and is exceptionally built to deal with the wear and shock of the process of drilling. Covered with a black oxide which prevents it from rusting and corroding and increases the lifespan of the bits.
  • Whats Included In the Bit Set: The set comprises of 47 impact pieces which are different sizes and dimensions. You can use them according to your requirement. 1 In: SL1/4, SL3/16, PH1x3, PH3x2, PH2x7, S1x2, S2x3, S3x2, T15x2, T20x2, T25x2, T30; 2 In: PH1x2, PH2x2, PH3, S1, S2x2, S3, T15, T20x2, T25x2; one extension rod; 1 impact grade socket adapter; 3 nut driver bits.

130nm efficient impact driver: powerful motor delivers 1150 in-lb (130nm) peak torque and 0-3500rpm for large range applications of jobsite.; 1/4" quick load hex chuck offers greater durability, compatibility and tightness for fastening tasks. Whats included in the bit set: the set comprises of 47 impact pieces which are different sizes and dimensions. you can use them according to your requirement. 1 in: sl1/4, sl3/16, ph1x3, ph3x2, ph2x7, s1x2, s2x3, s3x2, t15x2, t20x2, t25x2, t30; 2 in: ph1x2, ph2x2, ph3, s1, s2x2, s3, t15, t20x2, t25x2; one extension rod; 1 impact grade socket adapter; 3 nut driver bits. Durable construction: constructed from s2 alloy steel of hrc62 and is exceptionally built to deal with the wear and shock of the process of drilling. covered with a black oxide which prevents it from rusting and corroding and increases the lifespan of the bits. 2*2.0 ah fast charging battery: the kit comes with 2*2.0 ah large capacity li-ion battery, which means all-day operation is completely feasible and you never need to worry about running out of power in the middle of a project as long as you keep the spare charged up. a 1 hour fast charger(2.4a) can charge one battery in as little as 1 hour.

8
7.4
SCORE
DEWALT Toughgrip 100-Piece Shank Screwdriver Bit Set

DEWALT Toughgrip 100-Piece Shank Screwdriver Bit Set

by Dewalt
What We like

Patented bit-bar design allows easy removal of bits and customizable placement

more infoarrow_drop_down

Product Features

  • Full hex design increases bit tip strength
  • Clear lid allows you to easily see contents at glance
  • Connectable accessory storage system to optimize storage space

Connectable accessory storage system to optimize storage space Full hex design increases bit tip strength Clear lid allows you to easily see contents at glance

9
7.4
SCORE
BLACK+DECKER Li2000 3.6-Volt 3 Position Rechargeable Screwdriver Orange/Black with BLACK+DECKER BDA42SD 42-Piece Standard Screwdriver Bit Set

BLACK+DECKER Li2000 3.6-Volt 3 Position Rechargeable Screwdriver Orange/Black with BLACK+DECKER BDA42SD 42-Piece Standard Screwdriver Bit Set

What We like

IDEAL SIZES: Ideal sizes and geometries for frequent use projects and installation

more infoarrow_drop_down

Product Features

  • Three-position handle lets you work in tight spaces
  • Lithium Ion Battery holds a charge for up to 18 months
  • SCREWDRIVER BITS: Variety of 1 in. Screwdriver bits for household projects

Lithium ion battery holds a charge for up to 18 months Screwdriver bits: variety of 1 in. screwdriver bits for household projects Three-position handle lets you work in tight spaces

10
7.4
SCORE
Fisch FSA-309079 | 1.5 In. Diameter – 3/8 In. Shank – 3.5 In. Total Length Wave Cutter Forstner Bit

Fisch FSA-309079

1.5 In. Diameter – 3/8 In. Shank – 3.5 In. Total Length Wave Cutter Forstner Bit

by Affinity Tools
What We like

1. 5in diameter 3/8in shank 3. 5in total length

more infoarrow_drop_down

Product Features

  • Suitable for hard and softwood, coated chip board, laminates as well as mdf plates
  • Optimized cutting resulting in an improved running of your drill
  • High rotation speed
  • Precise cutting quality

High rotation speed Precise cutting quality Suitable for hard and softwood, coated chip board, laminates as well as mdf plates Optimized cutting resulting in an improved running of your drill

expand_less

I Agree
We use cookies to enhance and personalise your experience with us by collecting information about the pages you visit and actions taken on the site. More details